Search the forum,

Discuss Central heating header tank seems to be overflowing... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
27
Can anyone advise... I believe it is the central heating (for radiators) header tank that is overflowing from time to time - ie once or twice a day for a few minutes (it appeared to start again today shortly after the central heating came on - and then the pouring/dripping stopped after a few minutes.

But then again, earlier today it appeared to be dripping/running when the heating hadn't been on for 2-3 hours.
 
Basics first just check its only a third full when the heating system is completely cold .
Probably best putting a new ball valve in too .
Report back because it may be something else , dont worry about that yet though
 
Yes , we used to bend the old ones , the new ones will adjust but you still may have to bend it . Like I say a third full and then take it from there , obviously check the float isnt full of water while you do it lol
 
What would be the cause of the water level in there rising? I thought this tank was only to top-up the radiators - unless it isn't that tank where the overflow is coming from. Hm... a trip to the attic.
 

Reply to Central heating header tank seems to be overflowing... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
5
Views
134
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
175
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock