Search the forum,

Discuss Bpec portfolio help! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
6
Hello people,

Trying to find anyone that’s done the Bpec qualification here? And done there portfolio bit? I understand you have to upload pictures and do write ups but would like some help on how to fill it out properly?.

Any one that takes the time to help would be much appreciated.
 
Are your course tutors not advising you mate
Hi mate, thanks for replying. Unfortunately not there useless and just expect you to know it. My company has changed colleges and I was currently doing c+g now the new college is bpec! So basically have to do all my level 2 again in 5months to be ready for level 3 in February. So would love to see an example and could try and catch up.
 
It’s very bad that they aren’t guiding you. You should really raise it and push it up the ladder at the college. You’re paying for it after all. When I helped my brother with his. Is started off breaking down each task. Eg soldering two pipes together. You explain the correct process ie prep the pipe, deburr, clean it, apply flux, insert into fitting, etc etc take a photo of each stage. Once you have the soldering process recorded, in future work examples you can just make reference to the soldering process.
 

Reply to Bpec portfolio help! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
253
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
109
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
200
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock