Posting a message to the forum will remove the above advertisement
  1. Checkout our Plumbers Insurance area - heavily discounted Public Lability Insurance and Van Insurance specifically designed for plumbers.

Recent Activity

Activity stream for all registered members at Plumbing Forum | Gas Engineers Forum | Plumbing Advice - DIY and Professional.

  1. marvoni attached a file to the thread What pets do you have?.

    Here's my boy, he's a red nosed American Pit Bull Terrier. [ATTACH] This is him on the couch wrapped in his winter blanket. [ATTACH].

    Wuti1.jpg wuti2.jpg wuti3.jpg Dec 17, 2017 at 11:27 PM
  2. Ric2013 replied to the thread UFH mixing valve not restricting heat to floor.

    Well, yes, ideally you would tee back in the same order you have teed off, but I would not be pointing the finger at that item either..

    Dec 17, 2017 at 11:24 PM
  3. Dtwone replied to the thread UFH mixing valve not restricting heat to floor.

    Yep, after 10 minutes of 60 degree heat going in the return gauge is up to over 40 degrees and the barrier pipe coming out of the floor,.

    Dec 17, 2017 at 11:18 PM
  4. afee12345 replied to the thread Radiators not getting hot.

    Solved... Turns out valves that turn of water next to magnaclean filter were horizontal but were actually off. These valves turn...

    Dec 17, 2017 at 11:09 PM
  5. Ric2013 rated king of pipes's post Agree in the thread UFH mixing valve not restricting heat to floor.

    As above need a few pictures to help you out . cheers kop

    Dec 17, 2017 at 11:08 PM
  6. Ric2013 rated bogrodder's post Agree in the thread UFH mixing valve not restricting heat to floor.

    Can you put a picture up of your set up, so we can visualise what you have Thanks

    Dec 17, 2017 at 11:08 PM
  7. Ric2013 replied to the thread My first toilet fix and I have problems. Please help!!!.

    IF it's Armitage Shanks or Ideal Standard, they use a special design of doughnut that is quite soft and has a round cross section and...

    Dec 17, 2017 at 11:07 PM
  8. Ric2013 replied to the thread Request for Assistance.

    He's a new member. He has a job, and part of that might involve us if we want. I think he wants someone to help him out with his...

    Dec 17, 2017 at 11:02 PM
  9. Ric2013 liked NickH's post in the thread Request for Assistance.

    What I would refer to as utter bo****ks. I occasionally have to deal with young clueless types who talk this sort of rubbish. They...

    Dec 17, 2017 at 10:46 PM
  10. Ric2013 rated plumbandplumber's post Agree in the thread Request for Assistance.

    Any idea what the first paragraph means? Project mission sounds very exciting though. :cool:

    Dec 17, 2017 at 10:46 PM
  11. Matchless.plumb rated king of pipes's post Agree in the thread Minimum distance above combi boiler?.

    Install to the manufacturers instructions and you will be within the regulations , personally i would not hang a boiler on a bit of...

    Dec 17, 2017 at 10:42 PM
  12. Ric2013 rated DevsAd's post Friendly in the thread Replacing Room Thermostat 3 wires to 2 wires??.

    Blimey, BlockABoots - two pages to get the answer you were after. And you basically worked it out for yourself... (You were initially...

    Dec 17, 2017 at 10:37 PM
  13. Ric2013 rated rpm's post Agree in the thread How to repair crack with dirt in bathroom sink?.

    Can try neat bleach and a toothbrush.

    Dec 17, 2017 at 10:36 PM
  14. Ric2013 liked Stoney Ground's post in the thread Cold water tank almost boiling.

    I would copy the HSE on any communications and clearly show that you have to the HA. You may also ask that the system is not used until...

    Dec 17, 2017 at 10:35 PM
Loading...