You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
40mm
40 mm grenade (alternative spelling: 40mm grenade) is a common design for grenade launcher ammunition. It consists of a low-velocity shell (a grenade) with a caliber of 40 mm (1.57 in).
Hi Everyone,
Can anyone help? I have been searching but with no luck. I am trying to fit a Duravit shower trap which has a 50mm outside diameter euro pipe size outlet. I need to attach it to a 40mm UK size waste pipe and would prefer to solvent weld it as the pipe will be under a tiled...
Hi, just hoping someone can advise on best option to connect 40mm waste pipe to a flexible bath waste hose of approx 30mm, I assume some form a spigot to will needed but not sure exactly what to search for.
Many thanks in advance!
Hi,
I am new to this forum and would highly appreciate if someone could provide a guidance pls.
Ours is a semi detached property with bungalow on the other side. The previous owner of our property did a 1st floor side and rear extension around 2015. The old bathroom was with saniflo system in...
Hi,
I have a 40mm pushfit branch / boss that I want to convert to solvent weld.
I want to get rid of the pushfit aspect altogether, is this possible?
If so, how?
Hi
I fitted a bath/shower 12 years ago and a few months ago it developed a leak.
It was basically at a coupler on 40mm solvent where my new white PVC joined the existing grey PVC.
I cut a hole in the ceiling and could also easily view it with the bath panel off but not access it from there...
I don't know if such a thing just doesn't exist, but I am looking for a boss adaptor for a 40mm solvent pipe to fit a boss with 50mm internal diameter?
Hi all.
I'm just curious...why do bath traps use 40mm connections and pipework and yet basin traps use 32mm?
I have a very short length (1.25m) of 40mm pipe leading from the bath into the soil pipe. Half way along this run, I have a 40mm 't' connector, from which the pipework from the basin...
Hi all
We're having an old belfast sink fitted in our WC/utility room. We'd like to use the existing old waste; and by all accounts it'd be a pig's jacksie to remove even if we wanted to!
The threaded section in the photo measures approx. 1.88" / 47.8mm outside diameter and 1.24" / 31.5mm...
I am currently plumbing in my shower and wondering whether I will get away with the endcap as seen in picture one, already fitted, or whether I should replace it with the solvent weld type that is seen in picture two?
Normally you would avoid compression fittings where they are hard to get to...
I’m currently considering how best to do the pipework from the shower trap (90mm, 1.5”) and I just wanted some input from you guys and which is the best option, as shown in the attached photos?
Never done this kind of thing before and I am a little bit concerned that my pipework may not be able...
I have a basin waste and a bath waste that ideally I would like to connect together - to empty into a hopper.
So can I connect a 32mm basin waste to a 40mm bath waste - if so using a reducer or is there some 32mm to 40mm T?
Or should I upgrade the basin waste to 40mm if possible?
Ideally...
Morning all, I need to reduce a Floplast 43mm solvent pipe down to a 40mm size to connect to a 3-way valve. Can anyone recommend a product that will achieve a 43mm to 40mm reduction please?
Hi all,
Stumbled into a bit of an issue. I am re-doing my En-Suite. I am at the stage where I am fitting the shower tray. The previous waste exit was 50mm. The trap that has come with the new tray is 40mm. I have been searching everywhere to find one of these in the UK but for love nor money I...
Newbie - elemental parts-ordering question here:, relating to the size i need to refer to / compatibility when ordering replacement pipe parts.
For 40mm piping (under sink / washing machine arrangement) - see photo
1. For 40mm piping, when ordering welding couplers, welding bends and welding...
Hi Guys,
I'm looking to purchase a 40mm PVC/Plastic pipe cutter, i have a ceapy chinese ratchet type one but the ratchet system is broke, plus a 40mm pipe barely fits into it.
I will be doing a lot of floplast or polypipe solvent 40mm cuts (not sure which atm, whoever is cheapest and does...
Hi All
I currently have a Koi set up and it's all done with Toolstation push fit connectors (these are an odd size and different to polypipe ones, the ends have a 'clip' that holds the rubber seal in).
I have emptied the system due to leaks popping up all over the place, i have elbows, Tee's...
Hello
New to this forum, the last few days I have been constantly surfing the web looking at how to rectify my pipe problem.
I have a kitchen waste pipe which is 40mm that goes out through an external wall into a orange open PVC pipe which measures 82mm internal diameter which is of a open end...
Anyone knows a radiator wich has inlet and outlet roughly 40 mm from wall to radiator pipe centers(looking from side paralel to wall view).
I have ordered from mytub radiators, however got reply afer a day.
Order Notes:
------------------------ Steve 23.07.20 12:27 pm...
I’m having an issue with some waste pipework that I’ve never come across before! Customer has reported a leak on some 40mm waste pipe i installed under a kitchen sink about 18 months ago. It appears to have cracked but it’s like someone has taken a Stanley knife or a plastic pipe slice to it...
What's the best way to ensure a watertight fit connecting a 38mm European / continental waste pipe to a 40mm UK compression waste fitting without using a 38mm to 40mm adaptor prior?
The reason not to use an adaptor is because there's no space.
Note, a 40mm compression fitting on a 38mm pipe will...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.