Search the forum,

fitted

FITTED is an alternative rock band featuring Mike Watt (The Minutemen, fIREHOSE), Graham Lewis (Wire), Matthew Simms (Wire), and Bob Lee (The Black Gang). Graham Lewis' Wire was one of the influences for Mike Watt's Minutemen.Initially formed as a one-off group for Wire's DRILL festival in Los Angeles, the four decided to record an album.Their debut album, First Fits, was recorded from 2017 to 2018 with Lewis and Watt trading lead vocals. The first single was "Training Pit Bulls For The Navy." James Bennett of SLUG Magazine praised the album yet found it difficult to describe saying "Every track is an adventure, and every adventure is full of more twists and turns than could ever be reasonably anticipated." Chattanooga Pulse described it as "a true joy of creation with expansive, genuinely stirring rock numbers."

View More On Wikipedia.org
Recent contents Top users
  1. T

    I have a mixture of radiators range between 25 & 60 years old

    have a mixture of radiators range between 25 & 60 years old.Im having a new boiler fitted, do I change all the rads or just the old ones? Cheers
  2. back2thefuture1

    Boiler condensate pipe fitted behind plasterboard

    Hi everyone I hope you can help. We were getting some work done and our builder attached the boiler condensate pipe to the sink waste pipe. This was all then covered with dot and dab. Shown in the picture, red arrow. So the only thing visible now is a round pipe from the wall. We are yet to fit...
  3. R

    Is This Flexible Pan Connector Fitted Correctly?

    I had a plumber in to replace my old pan connector as it was leaking due to the wax deteriorating. Now when this toilet clogs up (which is a separate issue), it leaks from somewhere at the back. I can't tell where it's from but can tell for sure it's not from the water inlet or the toilet side...
  4. S

    New boiler to be fitted and low level UFH system

    I recently purchased the ground floor of a detached Victorian property in Dorset. As part of the refurb, I will need a new boiler and about 94m2 of low level UFH. The flooring is currently very solid floor boards.
  5. J

    How should a boiler be fitted to stud wall? Guidelines.

    Hi. I moved in to a new build home and 3 years later (after the builders warranty expires) the boiler is slipping off the wall at one side. This is putting pressure on the flue. Not something I’m happy with. Does anyone know the guidelines on how they should be fitted? I want to prove they...
  6. T

    Tesla T-Smart immersion heater reliability ?

    Has anyone fitted a Tesla T-Smart immersion heater and can comment on reliability ? On Amazon, there are mixed reviews, with one saying that it is dangerous as it didn't turn off properly. I spoke to Tesla and they said that those reports were early teething issues (but I guess they would say...
  7. B

    Just fitted K3 radaitor and the centre front panel won’t heat up

    I have started fitting new radiators in my house. The lounge kitchen gets very cold in the winter and is a big room that has previously had an extension put on it and is 19.5 metres by 6.5 metres with a 2.25metre high ceiling. I started by replacing an old radaitor with a 1200x 600mm K2. Which...
  8. K

    New mono mixer tap fitted, hot water flow is slow!

    I have just replaced the old bathroom basin mono mixer taps, 2 tap heads, standard compression valve type, to a modern mono mixer single lever type. For some reason the hot water running on the new single lever mono mixer tap is slow flowing compared to the old ones. The cold water running...
  9. A

    Small holes on plastic paneling fitted on top of pre existing tiling.

    I've been told I need silicone but I'm not sure which one or what type. Also, once it's filled and dryed would it be worth sticking a piece of the same type of plastic on to of the repair holes?
  10. B

    Anyone fitted an Ideal Standard i.life S Basin & Full Pedestal?

    Has anyone fitted an Ideal Standard i.life S 50cm compact washbasin with a matching i.life S & B full pedestal? The basin is T518501 and pedestal is T519901. I have a problem with the pedestal boxed and packaged as the T519901 (but marked T2839 inside as below) - it does not fit and from the...
  11. A

    Thermostatic Mixer shower can be fitted to Mains and Gravity Hot?

    Hi all, I've been researching and planning a job for my home the past few days and a few pieces of advice would be welcome to help me along the way. I have a cloakroom toilet which has a toilet and a sink, where the sink currently is there is good room to put a small shower cubicle and a...
  12. A

    Hot water very slow new mains pipe fitted

    Hi all Just had a new mains water pipe fitted and the hot water is very slow almost a trickle. We have a combi vaillant ecotec pro 824 and it seems to come out fast to begin with then slows down considerably. It seems the boiler is struggling to provide hot water at the adequate rate that it...
  13. G

    Should a Soffit flue extension kit be fitted ?

    Having purchased a new build, the current boiler flue terminates flush at the wall, the vented spent fumes from the boiler flue is within 300mm of the end of the vented soffit, a strip of UPVC is covering at least 400mm of the vented soffit, should an extension soffit kit be fitted to prevent...
  14. B

    New thermostatic shower cylinder fitted - now water is not hot enough

    I have a Bristan mixer shower. It started leaking from the temperature control. A local plumber replaced the thermostatic cylinder. It now doesn't leak - but the water is now 15-20 per cent colder than it was before when the temperature is at max hot. Why? What's amiss here?
  15. B

    Rainfall shower unit fitted. Gainsborough shower unit now blows PRD.

    Units involved: Gainsborough 10.5SE heater unit with Swirl (Screwfix 278PG) overhead shower kit with diverter. Hi guys. I have a Gainsborough 10.5SE shower heating unit. It has never given any trouble in the years I have had it. Until now it has been fitted with a generic handheld single...
  16. K

    Is replacement boiler all compression fittings above boiler normal?

    Hi opinions please replacement boiler same location as old, descending water pipes adapted to fit with 3 compression fitting each so each has 2 90 bends, short horizontal pipes and a coupler. overall 6 fittings with 12 olives and 4 bends all above new boiler, previously straight unjointed...
  17. Muskopia

    New boiler before all rads fitted or not?

    Hi. I'm renovating a house and have replaced most piping. The upstairs rads are fitted, but the downstairs is not as it's yet to be plastered. The pipes are just chased into the walls with Speedfit stop ends attached. Can I go ahead and get the boiler replaced and the system working now and...
  18. C

    I have fitted flowmasta bottom fill valve. the water flow

    I have fitted flowmasta bottom fill valve. The water why flow is very slow. Anyone any ideas why
  19. S

    Fitting a shower in place of sink

    Bathroom is downstairs, combi boiler upstairs, in the bathroom their used to be a bidet, we are toying with the idea of moving the sink to where the bidet was as the piping is still there and then using the piping from the sink to fit a combi shower. Is this feasible?
  20. G

    Can I use Corgi Leak Sealer with a Adey MagnaClean micro 2 fitted.

    I have a Worcester Heatslave 11 oil combi boiler 3 years old with a Adey MagnaClean micro 2 fitted. Ive had a slow water leak for a long time loosing about 0.5 bar of pressure every 2 weeks. The leak was there before with my old boiler. Ive checked all the radiators and PRV valve and cant...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock