Search the forum,

heatline

No Wikipedia entry exists for this tag
  1. D

    How to drain heatline boiler Monza 24.

    Hi I need to replace the pressure gauge on the boiler and needed some help on how to drain/isolate the water in the boiler first. Help would be greatly appreciated! Thank you.
  2. I

    Boiler Switching off Heatline compact s24

    Hi all, Well i think this is my first thread ,and you've guessed i have a problem so ill get straight into it. Decided to install some Fernox F3 into my system as i have been cold spots on some radiators,ive used this before and its always done the trick. Anyway i dropped all the water in the...
  3. hary_j

    Heatline Capriz 25 combi

    Hi all, Went out to this one really late in the evening yesterday. When the boiler is switched on for CH mode, it takes on average 3-4 minutes for it to actually start the process. Once started the flames fully rise and begin to gradually go down and cuts out. From the time it fires up and...
  4. B

    Heatline Monza 28 Gauge Pressure Water Pipe leak

    My boiler was leaking water this morning and its pressure gauge was also filled with water. I opened the front panel and I found out that water cable connected to pressure gauge was bleeding heavily. I have ordered its replacement on eBay for £15.00 and but I want to know if it's easily...
  5. Z

    Heatline Capriz Plus Drain Plug

    Hello, i require a drain plug for a Heatline Capriz Plus 28a, i've just phoned up the spares line and have been given a code of 0020203966, but when i look this up at any supplier it is listed as a 'handle'. I'm just wondering if anyone else has ever needed one of these, if they managed to get...
  6. P

    Monza heatline hot water issue

    Good evening , Heatline monza, pressure gauge rises and reacts as if air hitting the exchanger, boiler cuts out then back on it then opens the prv. This only happens when there is a demand for hot water. Heating seems to run smoothly with minimal increase in pressure. I checked expansion...
  7. P

    Air Pressure Fault - Heatline Boiler

    Morning all, We inherited a c.2007 Heatline Compact boiler when we moved into our house. On Friday the boiler developed an air pressure fault. I first tested the air pressure switch in both the Common-normally closed and Common-normally open positions and both are working ok. I even tried a...
  8. Z

    Heatline C28 luke warm DH water only after fixing leak on diverter valve

    Hi due to a leak in diverter valve I bought a diverter valve kit and changed all the components after cleaning out the bloc. I also took off the heat exchanger whilst i was inside the boiler and gave it a complete descale. when i reassembled everything i seemed to no longer have HOT water in the...
  9. V

    Heatline Vizo Flashing Red Light

    Hi, My heat-line vizo boiler has suddenly stopped producing hot water or heat. the flame is not igniting. The pressure is at 1. I’m a bit lost. iCloud
  10. S

    Heatline Vizo 24, no hot water

    Evening all, Been to this vizo tonight and no hot water.. but heating works. There’s no fault light on the display neither. When you run the hot tap, nothing happens. The little port above the Hall effect sensor that houses the wet end of the pressure gauge has been weeping out onto the...
  11. B

    ** Heatline Monza 28 expansion vessel **

    I had a Heatline Moza 28 boiler fitted around five years ago. It had some pressure issue from very first year. I used to top it up manually. Then last year, it stopped working altogether and boiler engineer had to pump up its expansion vessel. my boiler worked fine for whole year. Now it am...
  12. H

    Heatline Vizo 24 Boiler - Flames Cut Out (Pump continues running)

    Over the last few days we are having problems with the boiler cutting out after a few minutes. Hot water seems to be fine (although it may be taking a bit longer than normal to heat up), and the flames are all lit. They remain lit whilst the hot water is running (which is correct). The...
  13. ShaunCorbs

    .....Heatline c24.....

    @Harvest Fields
  14. A

    Heating issue with heatline capriz plus 24a

    customer complaining regarding heating running on low heat around 40.c at most, showing on front panel. Have push up tempreture to maximum of 65c but boiler just dosnt seem to go beyond 40.c. Hot water works fine. Its a small flat with 3 radiators 1 large and 2 medium size, have carried out...
  15. Bibbs118

    Heatline solaris hi readings.

    Hi, just spend ages cleaning the plate on this bag of Rubbish, serviced it and the emissions where thru the roof, cleaned make heat ex but still very very high. Tried adjusting the air Gas ratio as per MIs but not joy . Any one else had this and managed to sort. Cheers .
  16. M

    Heatline Capriz and Nest?

    hi guys. My brother has just bought a house and theres a Heatline in there with just a mechanical clock for contols. No stat. He’d like a Nest or some other smart stat if possible. Do any of you guys know whether the Nest is compatible with this boiler or know of a cheaper alternative? Thanks guys.
  17. S

    Heatline C24 pressure going too high

    Hello, We have a heatline C24 boiler & when the heating is on the pressure gauge is going up into the red to as high as 3.5bar, When the heating is off it sits at around 1.3-1.5bar. I turned it off & waited a few hours for it to settle & drained some water via a radiator bleed valve to relieve...
  18. spanner

    Heatline S24 compact intermittent flame.

    Hi guys, weekends here again and a right waste of an afternoon.. Turning on the boiler sometimes it firing and working fine with all dashboard lights on as normal. Then goes out. Fan runs and sparks up little flame then goes out? Was surprised the price of the flame rec was £55. Went to install...
  19. S

    Heatline vizo 24 woes

    Evening boys and girls, Ive got an issue with this boiler and was wondering you good people could shed any light. I was sent by the landlords to a no heat/ hot water. The boiler is going through its sequence.... heating demand- fan/pump- aps proved- gas on-igniter- flame lights but...
  20. T

    Heatline C24 no DHW C.H working

    Hi All, New to site and after some advice. Been to Heatline C24 today, no dhw when tap opened, no tap display, no fault display. C.H ok so boiler working. I've changed the flow sensor and micro switch, ntc and pcb still not recognising open tap... Any suggestions? Many thanks
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock