You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
help required
Online help is topic-oriented, procedural or reference information delivered through computer software. It's a form of user assistance. Most online help is designed to give assistance in the use of a software application, web or operating system, but can also be used to present information on a broad range of subjects. When online help is linked to the state of the application (what the user is doing), it is called Context-sensitive help.
Just discovered water is constantly dripping out of the tundish (noticed from the overflow pipe outside dripping…) I beleive it’s coming from the prv as I appear to have a drip under that too and water dripping in tundish is cold. I’ve also discovered after finding this forum that I probably...
Hi,
It may be coincidence but not long after getting oil fired central heating fitted to older ex-council property (fireplace and necessary plumbing torn out/replaced as required) every time toilet is flushed it sounds like a foghorn. Vibrations run through house and can be heard clearly...
Hello,
New here.
I have some older type single radiators in my home, that I want to keep.
The are supplied by 15mm copper pipe, into the valve, that has a 3/4 union type fitting.
I want to replace these fittings with TRV's and am having difficulties finding a direct replacement.
My floors are...
Can someone please help me, I have a small plastic pipe hanging from the bottom of the boiler. It intermittently leaks from time to time. Roughly around 1-200 ml water every so often! Worried it could spell a major issue in the future! Thank you in advance!!!
Hi All,
Having the layout on the ground floor reworked, the plans to do so included moving the internal vertical soil pipe on the ground floor too.
This pipe picks up the bathroom and en-suite on the 1st floor, and bathroom on the top attic floor too. So quite a bit goes through it, though on...
I have a sealed bath that is leaking into my kitchen when emptied, unfortunately the pervious owner has tiled all around the bath without leaving an access panel to the pipework/drain . is their a liquid sealant that i can use to fix the leak or do i have to remove all the tiles . I have tired...
Hi,
I have a an IDEAL ICOS HE 15 boiler that was fitted in 2005 to a new build property and in general it's been pretty reliable over the years. However the last few weeks it started to show an L&F fault, which a reset normally clears for a week or so. However yesterday morning I woke to the L&F...
Hi there,
I was hoping you lovely people could help me to identify this toilet cistern push button system below, so I can replace it or get something similar.
The internal push button is completely broken, but would I need to replace the whole part of the cistern section with the external push...
Baxi main Eco Elite. Shower taking ages to warm up if at all and when it does the hw light still doesn't come on. Central heating fine, diverter valve changed within last two years
Hi, Hoping someone can help me out, I'm stuck. I have a Camray 5 boiler, which will fire up and burn fuel for around 10-20mins, no heat to the radiators although I have an initial burst of hot water (10-20mins). I have changed the pump, this week, changed the thermostat about 10 months ago...
Hello,
I am hoping someone on this forum may be able to offer me some advice.
I had a big water leak this morning from the mains water supply into the house, under the sink. The leak occured before the shut off tap that i could have used to turn the water off internally and had to turn the...
Hi All,
Newbie here and I wanted to understand the current heating set up in the new build property. Our builders havent been useful at all apart from saying it works as any other set up
I have an Ideal boiler in the kitchen and a hot water cylinder on the first floor. Heating is split into 2...
tholbear
Thread
control
helphelprequired
newbie
programmer
required
thermostat
Hi,
I am in need of some help/ advice regarding a project we are working on.
We are refurbishing an existing residential house and converting an adjacent shop in to a new house in Kent (Southern Water waste). The existing drainage from the house runs under the shop floor, in to an inspection...
Hi there,
Hoping someone on here could assist with a query I have regarding a valve on our hot water draw-off from our Megaflo system.
Have called out British Gas Homecare engineer as hot water pressure has decreased on all taps/baths/showers to the point that it takes ages to fill bath/sinks...
Hi there,
I have an F22 fault on my boiler, we only moved in recently and had a radiator removed for some work to take place on the wall behind. I am presuming this has reduced the water pressure in the boiler which is why we are without central heating.
The help guides and videos I have...
Hi everyone, I am hoping for some advice on a few issues I am having with central heating/water.
1) We recently had new landing radiator fitted, and in order to fit the existing rad cover on it, the plumber had to leave the TRV off. This radiator always seems to be belting out heat even when...
Hi Guys
I've recently finished my gas course, now need to build the onsite portfolio (14 jobs) which is required before I can get the ACS booked. Before gas safe registration
Bit of info about me!
Ive been a sparky for 16 yrs and have lots of heating knowledge, I have done G3 unvented and solid...
Hello all,
I'm hoping for some help in diagnosing an issue with our WB Greenstar 28i JuniorMK4 (installed late 2011).
Over the last year the boiler had needed topping up every now and again, however in the last couple of weeks the boiler has been losing it's 1.5 bar over a 24 hour period, each...
liamconnolly
Thread
greenstar
helphelprequired
pressure
pressure loss
required
worchester
Hi there, If anyone can help me or at least give me some pointers it would be great, as I am seriously stuck.
I do have a technical back ground but my knowledge of central heating is very limited, prior to making a choice on attempting a repair or looking at going down the combi route as a...
Hi folks,
Ive got a problem with a glowworm spacesaver mk2. Its in the new house we moved into and has been working fine until yesterday. The problem started when the pilot light went out. Ive relit it no problem and then tried to activate heating via the programmer and the fan kicked in but...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.