Search the forum,

hepvo

No Wikipedia entry exists for this tag
Recent contents Top users
  1. K

    Advice; Hepvo waste valve

    Hi, does anyone have experience with fitting a Hepvo waste valve to a pipe which already has a trap (trap is part of the waste). I understand if you do this it "may" cause pockets of air which may slow down the water discharge. This is what the technical dept of Wavin UK told me - I don't...
  2. P

    HepvO and Wirquin 90mm Slim Shower Waste (Waterless Membrane) question

    I'm in the process of revamping a bathroom. At the moment it contains a toilet, basin and bath with an overhead shower. The basin and toilet share a common waste pipe which feeds into the soil stack behind the toilet. The soil stack is internal and boxed behind a stud wall in a corner and has...
  3. E

    Regs for internal condensate pipe

    At present Heatsave combi in bathroom with condensate with long run outside in 3/4". Plan is to connect internally to existing 32mm waste from basin. Bottom of boiler is slightly lower than top of basin. If I connected under floor boards using a tee and a bung to reduce to 3/4 I could run 3/4"...
    • emergencyman
    • Thread
    • basin boiler condensate condensate pipe hepvo internal pipe regs
    • Replies: 35
    • Forum: Plumbing Jobs | The Job-board
  4. J

    Bath: 75mm trap or 50mm Anti-syphon trap?

    Hi there Looking for advice from you hardened pros... Have bath, feeding into soil stack, via 3.1m of 40mm pipe with two 90 swept bend. (The run was going to be only 1m until I decided to flip the bath round for a better view!) Currently fitting the bath, I could fit the bath 600mm high (rim...
  5. S

    Hepvo flow valve

    Hi all, Firstly, I know naff all about plumbing. I have just bought a house (off a plumber) and in the bathroom I have a seperate bath and shower cubicle. The bath drain is into the main drain and the shower is teed off from this with a Hepvo waterless valve in line with it. The issue I have...
  6. M

    where to buy hepvo valves

    Am after the above. Anyone know a good place to buy them from? They're expensive in bes and even more expensive with angled adaptor to connect onto bath.
  7. R

    shallow shower waste trap with HepVo valve?

    we are thinking of connecting the bath, shower and basin waste to underground drain that is connected to the pan waste. all are 40mm solvent weld pipes and concealed in walls and underground. we have been told to get a shallow top access waste for shower as we will NOT be using a riser kit for...
  8. A

    problems . . .

    Yes this is a follow on from my other post! I am installing a steam unit bath/shower that has unfortunately been shipped directly from china to here! It has an unusual trap, probably less than 50 mm in total, and much less in seal. This exits the shower about 1cm above the floor, although there...
  9. K

    Hepvo valve - will it work?

    I was having a problem with a foul odor coming from the 40mm waste pipe the washing machine is connected to. There is no P trap in place. Just a vertical run of about 200mm and then an angle to run horizontally into the main waste pipe. I picked up a Hepvo and connected it straight onto the...
  10. D

    Basin Waste Fittings

    I have a custom built basin stand that is tiled and has counter top basin attached. See below. I will be hiding the pipes by building a removable tiled shelf, back, and top to go into the recess you can see in the picture. I have fitted a shallow bottle trap. The only problem I have is...
  11. W

    Non U bend U bend

    Hi all, Trying to save space under the new bath with this piece of kit no U bend but internal membraine that closes to prevent odours and also it claims no water noise I think expensive at £20 is this good or will it fail. Your help very welcome Thanks
  12. T

    HepVo fittings

    I am going to fit a HepVo trap vertically on the waste pipe from a sink. Can anyone tell me what fittings the HepVo comes with? Do I need any extra parts to fit it inline? Thanks Trigger
  13. M

    How to fix positive pressure and add a dishwasher? HepVO? Away from sink?

    We live in a second floor flat, with one more floor above ours. Our kitchen sink drains into a 40mm PVC pipe that goes directly to a soil stack about 1.5 meters away. In our flat, the kitchen sink is the only drain connected to this soil stack (there's a separate one for the bathroom). However...
    • mfripp
    • Thread
    • 40mm adaptor appliance bathroom dishwasher diy fix hepvo horizontal maintain noise pipe pipes plumbing positive pressure problem pvc pipe sink smell soil trade trap traps vertical wall water
    • Replies: 6
    • Forum: Plumbing Jobs | The Job-board
  14. N

    Unvented D2

    HI all just had a look at a job,new unvented cylinder to be put in cuboard in the center of a house (renovation) think it's going to be a problem getting the d2 pipe to the outside(tile floor ect) has anyone used a hepvo valve and gone into the soil and vent(happens to be close) more to the...
  15. S

    Trouble with the concept.....

    This morning I had to look at a problem with a drain, The house has one bathroom, downstairs cloakroom, washing machine which are all plumbed into one soil stack. The downstairs toilet has an air admittance valve and coming off this short stack is the washing machine feed, this also has an air...
    • secret squirrel
    • Thread
    • air bathroom blockage drain error hepvo problem smell soil toilet trap traps trouble valve valves water
    • Replies: 4
    • Forum: Plumbing Jobs | The Job-board
  16. J

    Do HepVo valves work

    They are pricey but fitting a 75mm seal p trap under my bath is looking difficult with the space.
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock