Search the forum,

incoming

Incoming is a 3D shooter video game developed by Rage Software and published by Interplay. The game was first released for Microsoft Windows in late 1998, and was followed by a Sega Dreamcast version, which was released in Japan on December 17, 1998, in Europe on October 14, 1999, and in North America on September 15, 1999. Set in the near-future of 2009, the game primarily revolves around controlling vehicles and turrets to fight alien invaders of Earth in one of the campaign modes, the arcade mode, and with or against another player. Some levels include brief real-time strategy segments.Praised for its then-advanced graphics and sound, the game was generally well-received on the PC, though the critical response was less positive for the Dreamcast version. A sequel entitled Incoming Forces was released in 2002 exclusively for the PC. An arcade version of the game, utilising a unique hardware interface, was released in 2003.

View More On Wikipedia.org
  1. J

    USA Pressure Pump strain on incoming line?

    Does a pressure pump system add additional strain to the line coming from the city water meter to my house? 200' run
  2. D

    How to set up 1st fix incoming cold water supply

    Renovating an older property with good water pressure. Proposing combi on 1st floor, but am not sure if it should be 1st take-off... If it were to be it would mean doubling back pipework to kitchen and then back upstairs to service sinks etc.. Then there is the electric shower supply... Any...
  3. K

    Incoming Water pressure

    We have a viessmann 111 and we was expecting faster hot water flow. I looked at the PRV it is set to 2 bar, the boiler has a 46l storage tank, so will this PRV set to 2 bar affect the hot water flow rate to the taps. Can the PRV be set higher than 2 bar ? Regards Ant
  4. Stefromthewirral

    Double Check Valve on incoming mains

    Hi all, I have two questions that I'm looking for advice on please? 1. I've been asked to fit a double check valve on a new incoming main. I only did my water regs last year and this wasn't stipulated in the reg's? Has this now changed or did miss something? The property in Cheshire. The main's...
  5. D

    Incoming mains 3bar flow rate 16litre permin

    3bed house 2 shower 2sink 11rads What size combo boiler please
  6. J

    Incoming mains black plastic pipe to 15mm copper

    Hi. Have a mid 1980’s house with the mains water coming in from underground via a black plastic pipe, of which the external diameter is 27mm. There does not appear to be any markings on it, but maybe some faint green. This goes into a 15mm copper pipe via a stop tap with compression...
  7. rpm

    Incoming water pressure in your area is ................

    Pretty much as the title say`s really, wondering how much variation there could be.
  8. J

    Tap off hot water pipe for my basin to shower ?

    Hi, I have an Electric shower (cold incoming pipe only) in my en-suite shower unit and due to all the usual problems would prefer to add a a cold pipe (so I can install a non-electric unit) from the hot water feeding the basin which sits next to the shower cubicle. The heating system is Gas...
  9. R

    Incoming gas pipe

    Hi, I am in the process of converting my integral garage and the Incoming gas pipe from the metre is on a wall that needs to be plasterboardsd, I was going to use 38mm battens to space the plasterboard off the wall to miss the pipe. Is this legal/within the regs? Is there another way of doing...
  10. Jay The Plumber

    Lead incoming main.

    righto, I dont do much of this, usually stick to heating and boilers but... its my mums place so I better get on ;) her stopcock is wiped onto lead and is leaking and I gotta repair.. I know using a taft or any lead joint etc is a no no now so was planning to use a Philmac universal coupling...
  11. S

    Very poor flow rate and pressure on the incoming main

    Hello I ve been to look at a job for a builder i work for. They are converting the back end of a garage into a bathroom. At the moment there is two 50 gallon CWS tanks linked together on the floor in the garage with a submersible pump in it pumping the cold water up to the CWS in the loft. It...
  12. B

    PRV fault

    Does anyone have any experience in failing PRVs? in my property in France, I have a Sauter 200l electric wall hung water heater. The inlet PRV on the old heater kept letting by. Found another PRV on the incoming main. The main PRV showed 2 bar on the gauge which is clearly wrong. Took it apart...
  13. W

    Stuart Turner pumps

    Hi, I'm looking for views from someone who has fitted a Stuart Turner flomate mains booster pump. A combi was fitted in place of a gravity hot water bbu without checking the incoming main. The fitters suddenly realised when they came to commission that they couldn't because the pressure and...
  14. G

    double check valve requirements for incoming mains.

    Hi all, current job to replace old lead incoming mains for 25mm poly pipe, from the meter in front garden to kitchen at back of house, 3 bed semi with a combi boiler, !question! do I need to include a double check valve on the incoming mains water valve arrangement. many thanks
  15. S

    maximum number appliances off 22mm cold mail

    Specing some light commercial ,how many toilets sinks can you normally get off a 22mm cold main,cannot download anything with PDF,as pc is buggering up,when would you upgrade to a 28 mm main. The building is a small club,with instantenious under sink heaters,no big unvented,or baths.
  16. S

    Chlorination of 63mm mdpe incoming cold mains

    Evening folks, I'm about to commence work on a 8 bed new build dwelling, the custard has just emailed me, asking if i know anything about how the incoming mains from road( about 130 metre run). Is it a requirement before or after Anglian water connect it in the road? I've carried out...
  17. M

    Depth of incoming water main

    Guys Could do with some guidance. Our incoming main has sprung a large leak (we are not on a meter fortunately) and I've got a builder mate doing the ground work for the plumber doing the new pipe etc. The existing gas, water and BT cables all run in the same "route" and they are only about...
  18. S

    Advanced Appliances thermal store

    Fitting one of thease with a mate,cannot see if you need a pressure reducing valve on incoming main,manufactuer was closed today,anybody any experience of thease,this one is going to be linked up to a log buning stove,any advice would be good
  19. S

    Help please with designing incoming mains size.

    Evening peeps, Ive been asked to carry out the work on a 7/8 bed new build, now usually when i do new builds the incoming main is never to far from the road, so the builder/s usually deal with that. This job is for a private customer, who has literally built the house...
  20. N

    Incoming water main hot

    Hi all, Here's an odd one hopefully someone can help with. I have a customer that has hot steamy water coming from their kitchen cold tap. The tap is fed directly from the incoming main which enters the house under her back door. The kitchen floor is hot along the run of the water main (about...
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock