You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
loose
Loose Change is a series of films released between 2005 and 2009 that theorize, based on evidence available about the 9/11 attacks, that it was a planned operation. The films were written and directed by Dylan Avery and produced by Korey Rowe, Jason Bermas, and Matthew Brown.
The original 2005 film was edited and re-released as Loose Change: 2nd Edition (2006), a third time for the 2nd Edition Recut (2006), and then subsequently edited for a fourth time for the HD Remastered Edition (2017). Loose Change: Final Cut, deemed "the third and final release of this documentary series" was released on DVD and Web-streaming format on November 11, 2007.Another version of the film, Loose Change 9/11: An American Coup, released on September 22, 2009, is narrated by Daniel Sunjata and distributed by Microcinema International.Coverage of the film increased in 2006 with the recut release having airings on U.S. and European television stations and over four million views online in four months, leading Vanity Fair to say it could be the first Internet blockbuster.Loose Change asserts that the account of the Pentagon attack, World Trade Center collapse and United 93 phone calls and crash is implausible and instead suggests the 9/11 attacks were a false flag operation. The film's main claims have been debunked by journalists, independent researchers, and prominent members of the scientific and engineering community.
Hello! We have a wobbly toilet seat… it’s a back to wall toilet and whilst one fixing is secure the other is not, and it looks like the fitter didn’t really attach it all. How do I go about fixing this please! The seat in question is from Qualitex.
Hi Everyone
Doers anyone know how to remove this toilet seat? It has no push buttons or caps that I can see and I am trying to fathom out how to tighten it!
Any help appreciated!
I've replaced the ceramic valves on my kitchen tap, but the new valves are freer turning than the old, and the levers move down from a partial open position under their own weight. I've not had this before - is it duff new valves?
I have a RAK toilet and seat, the seat keeps coming loose on one side, I tighten the screw but it doesn't last long. My question is will a replacement screw cure the problem or will I need to get a new seat?
I’ve cleaned the grooves and tightened the grub screw at the bottom, but this tap handle (on the right of the photo) just won’t stay put. When turning the water off it either drops back or comes off. I suspect the problem may be with the screw, which doesn’t seem to move much.
How might I get...
Hello,
I am concerned about the shower drain body in this picture being loose. I can move the metal ring visible in the picture left and right freely with my hand.
My question is whether there is way to fix this from above without having to access the drainassembly from below the shower tray...
just put a new pop up waste into my basin to find the trap does not fit correctly..
the trap fits just inside the waste thread opening and butts up against the plastic shoulder ensuring the rubber seal is pressed against the end Face of the waste.
im able to screw the nut up but even when its...
I would appreciate any advice on how to reattach the lever on the Kitchen tap (see pictures). There is no grub screw hole on the level and the end does not unscrew so I am at a loss as to how to reattach it.
Any advice greatly appreciated.
Many thanks
Hey all, my wife recently bought a pull out tap for the kitchen, much to my dismay as I was the one fitting it.
the problem is, the spout is really loose. I disassembled the spout only to find it’s on a thread without any o rings at all. So basically it seems like when you swivel it, you are...
Jacuzzi toilet seat fixings are loose and I cannot figure out how to tighten them. Nothing seems removal and they cannot be accessed from underneath. Can anyone please advise me how to tighten them? Many thanks and warm regards
Hi - Not quite sure how this forum works so this query is intended for all members - I have attached photos of a 'RAK Ella' soft close toilet seat with hidden fittings which was bought and fitted about 5 years ago. The seat has started to become loose and I am not sure how to tighten it. I...
Good morning!
I've had no heat in my attic bedroom for over 2 years - the rest of the radiators worked fine, but this one was a dead duck.
I watched some YouTube videos, and read through these forums, and decided to have a look at the TRV pin. Lo and behold it was stuck down!
I managed to...
Whilst investigating air in my hot water system / tapping noises from a radiator I noticed the return connection on the radiator isn’t fixed.Where the valve goes into the radiator just slides back and forth to the point I pulled it a bit far and water started coming out. Could this be the cause...
Hi there, my kitchen sink tap has become loose underneath the wooden worktop due to wear. The horseshoe washer is now too small and will not hold the tap firmly in place. I have not been able to find a larger washer yet. Any suggestions?
Hello
full disclosure, I am a DIYer.
When reinstalling a sink after having it out to refloor, the waste pipe came disconnected from the soil stack.
On inspection it seems to be a solvent weld fitting, but doesn't seem to have been solvent welded. It has been like that since the house was...
Hello, I had to removed my tub faucet yesterday and after removal I noticed that the copper pipe sticking out of the wall spins freely. It doesn't come out (I have not tried to pull with much force) but I am concerned the solder behind the wall is broken and it will leak. Am I way off with this...
Our mixer taps (bathroom sink) keeps working loose, I'm able to slightly tighten the nut (see image) however not tight enough, basically using pilers. Is there a correct tool or method, like a box screw etc ?
Hello
I cannot get my toilet seat to tighten.
I have no access to underneath the toilet. I have taken the toilet seat off and tightened the screw, but it just keep spinning. As if the hole diameter is too big.
I've tried the rubber expanding fittings and the plastic ones of similar style.
Is...
The taps look like this but are a different make: Victoria Traditional Basin Taps | Buy item at Victorian Plumbing.co.uk - https://www.victorianplumbing.co.uk/victoria-traditional-basin-taps
Even though I keep tightening the handles up as tight as I dare without stripping the threads in either...
Just bought a property and having problems with a loose toilet seat. There are Allen screws keeping the seat in place but if I try to tighten them it’s still loose. Is it a toilet that needs removing to gain access to the underside in order to tighten the seat?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.