Further to my earlier post, the stat trouble returned and we had a plumber visit. Not our usual one, who was too busy, but another independent recommended by him (Gas Safe Register confirmed). He agreed it was the stat and has arranged for an electrician to fit a new one.
While here, he had a...
Hi,
Have lived in our house for around 10 years and always had bad pressure if more than one tap is running, toilet is flushed etc(hot and cold). We have (what I believe to be) a mains pressure system with a non vented Megaflow cylinder.
We are about to install a new thermostatic shower and...
Hi All,
After spending countless hours researching and driving myself mad i was hoping someone with experience might be able to offer some advice.
We are totally renovating our house and installing a new boiler with megaflo style water system, and wet underfloor heating in a new large open...
Gary Oates
Thread
extension
heating
large
megaflow
smart
thermostat
ufh
under floor heating
underfloor
underfloor heating
I believe the Primary flow and Return and Pipes to my Megaflow cylinder have been connected the wrong way round as the return pipe is much hotter the Primary flow. Will this in any way have a detrimental effect on the operational capabilities of the Megaflow cylinder.
Hi,
Question - we are planning to upgrade our heating and hot water system in the near future. We are oil 'fed' and have poor hot water pressure so were planning on getting a megaflow or similar system. Am I right saying that we need to have both a boiler as well as the Megaflow, or does the...
itstime222
Thread
boiler
brand
cylinder
megaflow
oil
other
system
unvented
water
I am trying to find out why my Megaflow CL210 loses its bubble regularly after three months and would appreciate any comments on why this might be. The current position is:
1. The unit was professionally installed in 1999 and seems in good condition.
2. There is secondary circulation system...
Mr_Duck
Thread
bubble
every
expansion
megaflow
might
months
pressure
three
water
Hello I am looking for someone to service our megaflow (8 years old) and sort a problem out with it.
Background. Our set up has always been a boiler serving kitchen/cloakroom taps and megaflow. The megaflow serves the bathroom bath/shower and sink.
We've just replaced our faulty boiler with...
Hi,
I have looked on this site for the answer to this question but couldn't find it.
My hot water pressure feels like its getting low.
System is 7 years old and has never been touched apart from the normal yearly gas cert.
All system is outside.
I wondered if it was to do with internal air...
nodyland
Thread
air
bubble
color
combination
megaflow
refill
tank
valve
water
Hi, have Megaflo indirect unvented cylinder heated by gas boiler. Have noticed that when mains water stopcock is closed I can still draw hot water from the cylinder. Is this normal or is there a problem with the cylinder?
LSJ
Thread
cylinder
empty
hot
hot water
hot water cylinder
indirect
megaflow
running
until
water
My Keston 80 has stopped working and we have been getting quotes and varied solutions, I want the convenience of Combi but 2 out of 3 plumbers have said that isn't powerful or good enough for my home plus that the water tank a heatrae sadia megaflo is so good it better to keep that and replace...
Aussiewantsaps2
Thread
boiler
combi
megaflow
new boiler
oil
shower
solution
water
I have just purchased a flat as a buy to let. My question is regarding the Megaflow Unvented Cylinder. I understand from this forum that the cylinder should be serviced annually by a G3 certified engineer. Is this a legal requirement? If so, does the servicing engineer provide me with a...
Radioman
Thread
cylinder
engineer
megaflow
property
requirement
service
should
Hi
I need to replace my kitchen taps. Ordinarily I would turn of the main house stopcock and drain the system - then fit the new taps
However we have just had a "mega-flow" installed. If I do as described above will there be any issues when refilling the system ? i.e.airlocks etc ?
Thank you
Hi there
First post, so be gentle :90:
We are renovating and extending our newly purchased house and it has a Worcester 32cdi compact combi boiler that is around 2 years old installed already. We are adding one bathroom (2 in total) and an additional toilet (2 in total) and we are putting in...
Hi, I had a Megaflow 170i cylinder and a Worcester system boiler fitted a few months back and for the past month or so whenever the hot water comes on from the timer there is a loud bang/pop kind of noise coming from inside the cylinder and it happens every few minutes for about half an hour...
Hi,
We have a noisy/slightly dripping Megaflow cold water combination valve (part no. 95605022) in our flat.
Anyone in the area interested in coming to do the replacement?
I believe this is the part:
https://plumbsave.com/product/megaflow-cold-water-control-valve-95605022/
PM for more info...
I have a MegaFlow system, pump fed for HW and CH, gas boiler that wants to run constantly. Controller off (even removed from back plate) and the demand is still there. Pump is running v/v is open and boiler fires up.?
Everything seems intact. Re-established Air gap in MegaFlow, system bled all...
JimS
Thread
boiler
controller
megaflow
please
running
still
system
Hi
can anyone advise?
trying to fit a new radiator upstairs.
There is no outside drain off valve and it is a megaflow system with boiler
can anyone help give advice of how to do it?
( please move if this is the wrong forum)
Pea69
Thread
drain
heating
heating system
megaflow
outside
radiator
system
valve
Hello all,
Customer has an old Megaflow, the type with a white top, and is complaining that she is getting less hot water than she used to, gradually. The property has 2 of these, the other one is located elsewhere, and is working fine.
The problem cylinder is located at the far end of...
Hi, I've just recently moved home and lookingfor some general advice please from any experts out there. We have a HeatraeSadia CL210 Megaflo unvented hot water cylinder in the airing cupboard. The pressure forthe taps and showers is absolutely great but we've just started having centralheating...
bigbaddomy
Thread
boiler
central heating system
color
cylinder
hot
hot water
hot water cylinder
megaflow
oil
regular
system
unvented
water
Just changing an oil boiler on a job and they have just had a megaflow fitted. The installer has put a lever valve in, on the cold in with a tee connected to the discharge below the tundish as a drain off. Is it allowed?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.