have checked all voltages fan pump stat all ok boiler fine for days then locks out on code again
any one any ideas or come across this much. as baxi tell me its the code when the boiler doesnt know whats wrong with itself.
any way im just wondering has anyone come across this fault due to...
Hi Friends
So, had a call from a custard who has one of the above in a 1st floor flat.
There is no water to hot taps. She turns tap on and may run 10-15 secs then stops.
Cold taps all ok, no problems.
Any ideas? As I'm not G3 I'll not do it but could sub it out to someone as she's my private...
Hi Folks
I need to replace the lower immersion on a 210l cylinder but not sure which to go for. The one thats in there has a white cap and has the push on stat.
Any guidance please?
Thanks
(oh and yes, I have g3) :-)
Bunker
Thread
heater
identifying
immersion
immersion heater
manual
megaflo
megaflow
model
which
The system has 3 showers, kitchen and cloakroom. Question is can most water softeners cope with demand if most were running at once? Also are some softeners more up to the job of this demand?
Most say the timer models are not the best but twin coil units are the best?
Hi all
I had a dual element (top element always on and the bottom element on economy 7) Megaflow fitted a couple of years ago and generally it is pretty good.
However, I have already replaced the bottom thermostat twice and now it is playing up again. If I push a small screwdriver into the...
peter.beasley1@
Thread
bottom
element
megaflow
night
problems
thermostat
water
Hello, I had a leak from my combination valve and had a plumber replace it with a relience one a (3 bar / 8 bar unit). However now the temperature of the cold water is high(hot) unless i run off a lot of water. How do i get the cold water back to being cold again? do i need to call the plumber...
I have an unvented Megaflow system which is just over 2 years old and I have noticed recently that the water does not stay hot for a long time after the boiler (3 year old) has gone off. For example in the evenings it' on between 7:00pm and 9:00pm and without much water being used it's cold by...
Hi
My name is rob im new to the forum and im looking for some help
I have a classic 350ff boiler in my kitchen thats hooked up to a heatra sadia megaflow cl145 indirect cylinder on the landing and its constantly loosing pressure.
we moved in to the house in august and had the boiler serviced...
rob b
Thread
heating
heating system
help
house
loosing
megaflow
pressure
system
thats
unvented
water
Hello
I have looked through many threads and I need some more advice.
Baxi megaflow 24 HE
Explosive ignition:
basically the the boiler will or will not fire up with a loud bang enough to rattle units
for a while it is fine but after a day it gets progressively worse , had engineer out and...
Hi, I went to a customer who was complaining about the error e168, E119 and E133. I think I have fixed the E133, the electrode gap needed to be wider. The E119 , her safety valve had blown due to a faulty filling loop that was passing. Replaced that with a PRV today but she rang earlier saying...
I had some plumbing work done last week:
1. 2 new hot and colds running from upstairs en suite down to new kitchen downstairs.
2. New gas pipe coming out of the gas meter box into new kitchen for gas hob.
3, Old gas hob disconnected.
Pressure was tested before and after. Every seemed to be...
jonwade
Thread
again
button
having
heated
megaflow
press
reset
water
Ok title might be a catch all but hoping some can offer me advice?:smiley2:
We recently moved to a new house which has a megaflow system and I can see the mains is served by a blue pipe. The house also has a water meter.
Recently the water company called and visited saying they believed our...
tomjerry
Thread
house
issue
megaflow
meter
stopcock
turning
water
water meter
Hi. I have just noticed there is dripping coming from the area of the white pipe and just below on the vertical bit of the grey pipe as seen on the pictures. It is dripping rather than flooding. Does anyone have any idea what this means, how to fix it and how urgent it is. thank you. its not a...
Hi I live in a 2 bed /2bath all electric flat and want to install a mains fed water System. Can anyone tell me what would be the best solution , either,the gledhill pulsacoli BP or heatrae sadia megaflow system? And what the ads /disads are for either system. And given the size of the flat...
Klythawk1946
Thread
cylinder
either
gledhill
heatrae
megaflow
oil
sadia
system
Hi,
We have a two storey house and will be doing a loft conversion shortly. After conversion we will have a bathroom and two ensuites one of which will be in loft. We are thinking about replacing our current combi system with a Megaflow system which I understand is a brand name for the system...
LOFT CONVERSION COMING
This system is 10 years old and placed up in the loft.
Situation:
1) its right where the staircase will finish as you enter the loft conversion so must be moved.
2) The water tank is high and heavy so will have to go somewhere
3) At ten years old maybe better to...
365drills
Thread
boiler
conversion
loft
megaflow
oil
photos
removed
replace
should
Afternoon everyone, I hope your weekends going well, If anyone has a sec to give a helping hand it would be greatly appreciated.
I fitted a Baxi Megaflow 2 18kw system boiler Saturday, as a flush and replacement boiler job (yes i am GSR). I have never fitted this make/model of boiler before and...
COL_nottm
Thread
baxi
boiler
issue
manual
megaflow
oil
problem
return
system
system boiler
My first job monday morning is a fault on a system boiler thats constantly loosing pressure on the heating. The house has an indirect megaflo unvented cylinder. The tenant has to refill the system every morning. All the heating pipework is service mounted everywhere and no sign of any leak...
Hi
I have been to see a megaflow direct 210 litre, client was complaining that it keeps discharging periodically. I have spoken to Megaflow and recharged the airgap twice now but this has not helped as client has just called because it had discharged again. The expansion and t and p are working...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.