Search the forum,

might

Might and Magic is a series of role-playing video games from New World Computing, which in 1996 became a subsidiary of The 3DO Company. The original Might and Magic series ended with the closure of the 3DO Company. The rights to the Might and Magic name were purchased for US$1.3 million by Ubisoft, who "rebooted" the franchise with a new series with no apparent connection to the previous continuity, starting with the games Heroes of Might and Magic V and Dark Messiah of Might and Magic.

View More On Wikipedia.org
  1. krashd

    My bath plug/drain has suddenly blocked, what might be the cause?

    Firstly, I already have a fair idea of what I need to do to fix the problem (I hope plunging will fix it, I just need to buy one), I would just like to know what sort of thing can suddenly obstruct the pipe that my bath drains to. The problem... Normally someone can have a bath and then pull...
  2. J

    House doesn't need 30kw at present, but might do in future...

    We're looking at a new boiler system from regular to combi because we would like to use the space where the hot water cylinder currently sits. We have a large 3 bed semi and have an ancient 18kw Potterton boiler with 7 radiators in the house. Heat loss calculations not yet completed. We've...
  3. maleekos98

    I might give up on Plumbing this year...

    Hey guys, It's been an overwhelming & difficult year for me last year... so moving forward I have decided to change b.usiness industry. I have two plumbing web.sites and instead of wasting them (as I won't be using them anymore), I'm willing to give them away to someone who will benefit, so if...
  4. J

    Any idea where I might be able to find a 'Sam Alia' thermostatic shower valve?

    Just bought a house and the bathroom is 17+ years old - the shower valve is broken and if we can't find a replacement we'll be stuck with it until we rip the whole thing out. Not ideal when it's great condition otherwise. Full detail is Sam Alia Mixer Thermostat ref 3008188 & 3008181
  5. D

    Any ideas what this might be?

    I am wondering on the possibility of this soil pipe being made of asbestos. Before cutting with a dremel I decided it was probably better to get a second opinion on it.
  6. R

    Identify where or what a water pipe might lead to?

    I recently changed a countertop in my kitchen and while doing so took the opportunity to check the incoming water pipe that's hidden behind the cabinets, while doing so I noticed something that seemed odd, the incoming water pipe seems to split 3 times after the stopcock, the first split leads...
  7. centralheatking

    How do I put up a link to something u might be keen on

    I am quite good at most internet things but this one I don’t know really where to start.. Have a great weekend you all.... centralheatking
  8. centralheatking

    Its Just an Idea that might be kept Private

    Ukpf ..often gets posts from genuine people in trouble. We post our opinions and give advice. They are usually 'new' and thats fine. My idea is to set up a an area based response from ukpf but because we dont all know where we all are it wont work. I have a plan ...say 6/7 areas and trusted...
  9. B

    Any guesses which (Northern Ireland) plumber company this might be??

    I'll try to keep it short: Back in 2014 we had an electrical company from Northern Ireland do some work for us in the Luton and Bedford areas of England. I don't remember their name (hence the question), all I know is they used to come to the area SEVERAL weeks in a row in the summer and they...
  10. R

    "I might get another price, if that's all right?"

    I said it sounded like a day's work, so £170 labour. Not seen it, so was a guess. Replace bath taps Replace mastic around bath Replace some tiles behind a towel rail (customer had new heating system fitted and the RGI fitted the new towel rail over an area of missing tiles and thinks it will...
  11. W

    What do you think this might point to?

    My mum recently moved into a bungalow. Starts getting high water bills. They then tell her she's averaging 500 litres used a day so I go to investigate. No obvious leaks. It's a combi so could only be hot and cold leaking and it's solid floors with no pipes (that I can tell from initial...
  12. W

    What might cause this tap to over-run?

    After turning cold on and then off there is a 2 sec gap then for a few seconds more water comes out. Not just a few drips, not full force, somewhere in the middle. Not every time but most times. On swan neck taps where this happens I have presumed it's water left in spout and a bit of...
  13. W

    What might make combi produce low dhw flow?

    Mum just moved into new place. I am not GSR but can do rest plumbing. She has a logic 24 combi. Hot at all outlets flow resembles what you might get from a fortic in a flat. Boiler fires fine, water gets hot, just poor flow. Cold is fine/normal. Is this something a gas safe guy will have to...
  14. Eyespy999

    Replacement ceramic tap glands

    Afternoon all, I have been to 2 national merchants today to find replacement glands for a set of taps without success, sadly the tap has no distinguishing markings. Can anyone recommend a merchant that has a variety of makes? Photo to follow, thanks
  15. P

    high CO

    Been out to service a boiler today old unidare with a selectos burner. Had a 0.85 60 nozzle so changed for a new one old pressure was at 7.5 so adjusted to 8 bar could't get the smoke level to 0-1 it was about 5 i added more air up until the flame blew out then had to adjust back down again...
  16. Robert Tyrrell

    Possible problem with Hive but might be boiler

    I've just had a call from a customer of mine to say that his boiler (Worcester Bosch Greenstar 30CDi system on LPG) is not behaving as it should. He's not at home but controls the heating via Hive, and it's telling him that the boiler is running 24/7 with a temperature of 21°C, although he has...
  17. S

    Unvented HW Cylinder - 'static' pressure gradually dropping

    We've had our unvented cylinder installed for just under a year, and I've noticed that the 'static' pressure (all taps off) has been very gradually dropping over the year. When first installed, the pressure gauge read spot on 3.5bar (the nominal operating pressure), but is now at about 2.6bar...
  18. B

    Fibre washers

    Hello everyone, I found this site whilst spending my third day trawling the internet looking for a simple thing such as fibre washers. Or.... simple so I thought. I have been unable to find the sizes I require or anybody that can help. I bought a lovely set of Barber Wilson Bath/shower mixer...
  19. M

    Megaflow bubble lost every three months

    I am trying to find out why my Megaflow CL210 loses its bubble regularly after three months and would appreciate any comments on why this might be. The current position is: 1. The unit was professionally installed in 1999 and seems in good condition. 2. There is secondary circulation system...
  20. P

    Combi boiler & cold water tank in loft

    Hi all Recently moved into an old terraced house- in the loft is a very dirty looking water tank that has seen better days. With the house having a combi boiler i thought it was redundant and was going to empty it and get rid of it whilst the roof came off. But to my horror it supplies at least...
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock