You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
reducer
A fitting or adapter is used in pipe systems to connect straight sections of pipe or tube, adapt to different sizes or shapes, and for other purposes such as regulating (or measuring) fluid flow. These fittings are used in plumbing to manipulate the conveyance of water, gas, or liquid waste in domestic or commercial environments, within a system of pipes or tubes.
Fittings (especially uncommon types) require money, time, materials, and tools to install, and are an important part of piping and plumbing systems. Valves are technically fittings, but are usually discussed separately.
Hi All,
Just found this on old cistern in a loft. Looks to be original from the 1960s.
Google brings up nothing.
Any ideas?
Apart from leaving it alone...
I'm building a steam punk clock and am using a thermometer pressure gauge as one of the parts. What I need to know is how can I plumb to the rod extending from the pressure gauge without using several parts. The rod diameter is 12mm and I will be using 8mm copper piping for the project...
Hi All,
I am looking to purchase this part, if anyone has one or can point to to where I can purchase one then I would be grateful, as local to NN10 would be ideal.
3/8" x 1/2", MPT x FPT Connection, PVC Construction
Thanks all.
Hi Guys,
I am looking to replace radiator as the old threaded valve is shot on this old building but it is attached to what looks like 1 inch galvanized steel. I was hoping to freeze the pipe at the bottom (see pic) cut and reduce into 15mm copper, any ideas if there is a suitable adaptor out...
Hi all. I recently ordered two separate water filtration systems (the cartridge type) from a local plumbing company. For both installs the pipe size is 3/4". For one of the systems they sent me 1" inlet filters, so I'll need to add a 3/4" to 1" adapter. And for the other install they sent me...
Hi,
Does anyone please know if there is a 5" to 4" reducer? The old toilet in this first floor connects to a 5" internal plastic stack. It was leaking as a standard pan connector and a few tubs of plumbers mait were used.
It needs to sit inside the existing 5" Elbow as I'm restricted by depth...
I just bought a dish washer but I'm having trouble connecting the standard 3/4" inlet hose that came with it. As can be seen in this video:
https://photos.app.goo.gl/JqUcXuj5MT1KvKrZ9
It almost fits the installed faucet. The gap seems to be less than 1mm. The house was built in 1986, so I...
Hi all, had some great advice on this forum and need a bit more... I've used this reducer (pictured) to step down a 22mm lead loc coupler to 15mm. I inserted 15mm plastic pipe (with a pipe insert) with ptfe wrapped round the olive which is brass. Just read online that that's no good as brass...
Been in the garage having a practise with 3-part compression reducers on 10mm Speedfit pipe and it hasn’t gone particularly well and i wonder what i am doing wrong?
I found that the olive (swapped a copper one for the brass one due to plastic pipe) and bottom part that pokes out of the nut were...
Good Sunday to you all,
Quick question, as manufacturer still haven’t replied to my email a week later.
I’m looking to install Adey’s ElectroScale scale reducer under the kitchen sink, as it’s compression fitting, straight after stopcock, as I don’t have a water meter, so it can protect entire...
Hi all,
Stumbled into a bit of an issue. I am re-doing my En-Suite. I am at the stage where I am fitting the shower tray. The previous waste exit was 50mm. The trap that has come with the new tray is 40mm. I have been searching everywhere to find one of these in the UK but for love nor money I...
Installing HansGrohe I-Box shower valve. Using brass 3/4 elbow with a bullet reducer into Hep2o
15mm pipe for the hot and cold feeds. Not done much plastic and would like confirmation that this is a tried and true method.
Thanks
Paul
Hi,
Does anyone know where I can get a Copper US size 1/2L to UK 15mm solder ring straight reducer in the UK? I need to convert a US pipe size to a UK size, and I can’t find one anywhere. It’s for a gin still, so needs to be copper and not plastic.
Thanks
Hi guys..... and girls if we have some, good morning to all of you.
Last week, I had a sh*t day.
I plumbed in a whirlpool bath and used speedfit pipe and connectors. Brilliant,
Use these all the time as ive been bathroom fitter for many years.
However, massive issue accurred.
Using two...
I have a gas heating system in an 18 year old apartment block in the UK with concrete floors and would like to change and move the radiators but my plumber tells me he can't obtain the correct joints to match the 14mm pipe.
One of them was leaking a little and I removed and tapped it up only to...
Deleted member 89766
Thread
15mm
connector
help
joint
pipe
please
reducer
source
Am a bit confused as to what I need. I am needing to reduce a 35mm copper pipe down to 28mm.
Do I need anything else aprt from one of these.
End Feed Reducer - 35mm x 28mm - 9173 | BES.co.uk
Hi guys, I was wondering the best way to get from 50mm hdpe fusion weld to a 42mm pvc is there some sort of reducer that covers both types of plastic??
Thanks Rob
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.