Hi all,
I'm having problems with an old kitchen mixer tap.......the cold side is dripping from spout so I attempted to remove the brass cartridge to change rubber washers but for some reason after fully unscrewing it doesn't want to come out. Maybe something simple stopping it but I didn't...
I'm not an engineer I'm just looking for some advice i live in a new build since construction have had my boiler serviced every year since i bought the house todays service is the first time i have been notified that my fleu doesn't have any clips fitted to support it i'm just wandering how long...
Hi all, I have been battling with my local water authority with some ground movement problems next to a manhole. I have had builder round insists its a drainage issue causing the movement of the ground (water board responsibility). water board say they've been out, cleared the drains and...
Hi having a repeating fault 1st its has presser hot water and heating work
Well last night it stayed on even after program had turned off set for 2130hrs was still on at 0230 when i hot up but it would not turn off tryed reset but came back on ended up turninging off electric to boilor .to try...
Hey Dan PF is your show and as you know I love it...what about a priority section
for who ever to post on and get immediate replies my idea would be it sits at the top
this way no urgent ones get missed ..because thats whats important to first time post
people .sometimes then we can help ..over...
Hi guys, just a quick un. Has the regs changed for zoning of levels? I’m doing some some new builds and the architect has said that all houses regardless of floor area has to be zoned... ie upstairs/ downstairs. Anybody heard this?
Thanks
Local oil company filled an oil tank with four big cracks in the tank, i thought they were trained to oftec level in regards to oil tank assessment and risk. The customer only noticed and questioned the tanker driver on his concern of the tank bursting.
Hope you boys and girls on the forums have made a fuss of your Mums and the mothers of your children.....although I'm away My kids have given me cards to pass on to my Mrs...and they have Facebooked messages to her hope you have all enjoyed sharing time and greetings with your own Mums....alas...
Hi Guys,
I hope some one can help.
We have a simple 2 circuit water UFH upstairs in our flat one circuit for each bedroom.
The Master bedroom heats but the spare is stone cold. The Actuators seem to be operating and the valves opening.
Below is a picture of the valves. Please ignore the...
Kippy-Ken
Thread
circuit
heating
manifold
problem
regards
ufh
under floor heating
underfloor
underfloor heating
valves
wet
Hi all! I am relatively new. I am looking for full time employment as a plumbing heating engineer. I am gas safe and have all my ACS's. I am 28 and live in Macclesfield near Stockport Manchester . Any help would be great . Thanks.
LiamGray
Thread
color
engineer
gas
gas engineer
manchester
regards
turnpin
welcome
I have a Showerforce Easiboost 2 shower pump which has stopped working. When the pump first stopped it came back on about 2 days later but the pump sounded like it was struggling to pull water through and thus has not worked since. We are able to shower but with no power to the pump the flow is...
jackfitz
Thread
filters
installation
pump
regards
shower
shower pump
stopped
working
Right, as said, I have many a daft question and my first is about kinking or wrinkles when using a bender
Bought a cheap bender from Wicks (which may of course be the problem) and when bending, even low angles, I get wrinkles in the bend
I'm not particularly bothered about the wrinkles though...
I need to connect a Dish Washer waste to an Iron Stack and was wondering if I have to buy something off 365 Drills or if there is something out there I can use to drill and attach the Boss strap without much probs
Went to scrappers today and prices seems to be going downwards. The scrap yard is considered to be pretty good for the area.
Prices per kilo
Clean copper £3.40
brazery copper. £2.80
lead washed copper (heat exchangers) £2.60
brass £2.20
lead 90 pence
leccie cable £1.20
stainless 70...
hello,
I want to install a pressure gauge in my ch system. the only gauges I can find online are male threaded 1/4". The problem is I can't find any female straight connectors 15mm x 1/4". On the other hand there are loads of 1/2" or 3/4" but I cant find any 1/2 or 3/4in gauges.
I suppose...
uk1simon
Thread
advice
central
central heating
female
gauge
heating
please
pressure
regards
simon
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.