Search the forum,

Discuss Can't find a 26mm tap aerator anywhere? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

twig87

Hi all,

the aerator on my kitchen tap has worn out over time and needs replaced. I measured it at 26mm, and upon searching, found that such a thing didn't appear to exist. Thinking I may have been measuring wrong, I ordered both a 24mm (which was too small) and a 28mm (which was too big). I'm not a plumber and am reasonably clueless so have only been using layman's websites like Amazon, eBay, Google etc to look.

Does anyone know if I can get a 26mm male thread aerator anywhere? Thanks in advance :)
 
Do you know the make of the tap? If you do, contact the manufacturer for a new aerator.
With so many brands and different sizes of parts it can be really difficult getting a part like that.
 
Status
Not open for further replies.

Reply to Can't find a 26mm tap aerator anywhere? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
51
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
203
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock