Discuss Central heating pipes 'banging/knocking' in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Stroll on Callum, rather you than me.

Have you tried using a pipe to your ear? Something like a metre of 22m copper pipe - clasp your hand around the end, and then press your ear against your hand. Check the most likely spots. Try using a pipe detector to trace the line of piping and check along the route.

Good luck with it - let us know how you get on.
 
Status
Not open for further replies.

Reply to Central heating pipes 'banging/knocking' in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
304
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
310
PSxxxxxx
P
Hi all I need to run this CH pipework to a radiator located beyond the electric wiring in the image below. Just to be safe I was wondering if...
Replies
3
Views
262
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
248
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
328
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock