Search the forum,

ferrolioptima 701

Discuss ferrolioptima 701 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

GAZZA19

called to see boiler everything is working fine on hot water , but when on heating boilers flame is knocking on and off, would that be the thermistor ? thanks:D
 
hi thanks for reply , does not seem to be kettling just knocking off and back on all rads working just not as warm as they used to be .:D
 
Status
Not open for further replies.

Reply to ferrolioptima 701 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
221
cheddarman
C
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
218
Dave Moore
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock