Search the forum,

Greenstar 28i Junior hot water question please.

Discuss Greenstar 28i Junior hot water question please. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

P

Peter3

Messages
23
Could anyone please confirm, if this boiler has a preset for the hot
water temp?
This boiler has an owner adjuster for the CH but not for HW ( understand
later models such as the 30i, had both )
If there is a preset adjuster, can anyone please tell me where to find it.
Thank you, Pete.
 
No adjustment
 
Peter3 said:
Could anyone please confirm, if this boiler has a preset for the hot
water temp?
This boiler has an owner adjuster for the CH but not for HW ( understand
later models such as the 30i, had both )
If there is a preset adjuster, can anyone please tell me where to find it.
Thank you, Pete.
Click to expand...
The only way to control the hot water temp is to run it slower if you want water hotter ..it’s dead easy Rob Foster aka centralheatking
 

Reply to Greenstar 28i Junior hot water question please. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
191
ShaunCorbs
ShaunCorbs
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
210
oz-plumber
O
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
273
oz-plumber
O
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
162
SimonG
SimonG
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
218
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock