HALL of SHAME PHOTo`s

[rpm]

Ignore

 

[Chalked]

K

[/URL][/IMG]

Fancy fitting a socket behind that gas pipe... ,!:waving:

 

[Riley]

hmmmmm

 

[IND_Nick]

That's a notch! What a way to start a Monday morning, new joists all round!

 

[IND_Nick]

Same house as above, flue held up with plastic gutter brackets! We were not popular, new floor and flue to be redone. Let's see what we find tomorrow!

 

[ShaunCorbs]

Same house as above, flue held up with plastic gutter brackets! We were not popular, new floor and flue to be redone. Let's see what we find tomorrow!

No screws either and need more clips

 

[Best]

Installing a new stopcock? Allegedly not much up and down movement on pipework?
Why not do this, if you are a kitchen fitter?

 

[PlumbBobBob]

jeez at least use the same make for all of it

 

[Gray0689]

Thoughts

View attachment 26692

Ffs wrong way

Not much left of the lintel

 

[ShaunCorbs]

Not much left of the lintel

Nope bet they had fun drilling it

 

[ShaunCorbs]

non gas safe eng decides to pipe up his new boiler

now with the exact kit hes got what would you of done

i would of dropped the boiler and re cored the flue and made things nice and fit the kit vertical

 

[Whyme]

God that'll take some boxing in [emoji33]

 

[Stoney Ground]

non gas safe eng decides to pipe up his new boiler

now with the exact kit hes got what would you of done


i would of dropped the boiler and re cored the flue and made things nice and fit the kit vertical

Can't believe he's put a bracket up for the curtain rail. You could rest it on the pipe from the PRV.

 

[plumben]

non gas safe eng decides to pipe up his new boiler

now with the exact kit hes got what would you of done

i would of dropped the boiler and re cored the flue and made things nice and fit the kit vertical

If it was me i'd of moved the boiler down and to the right, and ran all the pipework next to the corner boxing, easier to box in with a simple wall unit and panel, lots of access

 

[IND_Nick]

I had to stop and snap this beauty!

 

[Alex Knight]

 

[Howsie]

Stinky sinky!

 

[rpm]

Is that hose that drops and rises from the overflow?

 

[rpm]

Fear somebody I know is in for the same, showed me their new sink and waste from Ikea. All rather strange as various bits rotate and extend, all sealed (apparently) with tiny rubber rings.

 

[Best]

Is that hose that drops and rises from the overflow?

At least that means accidently the overflow has its own trap. :smile:

 

[IND_Nick]

Who does this! It is too close to new kitchen unit you cannot turn it off by hand. Made me laugh though.

 

[ShaunCorbs]

But better than in a concrete floor and least you can still see it

 

[Stoney Ground]

Unusual cylinder connection, but held up for many years

 

[ShaunCorbs]

You only need one hole when installing a kitchen extractor

 

[Riley]

Surely that's a wind up???? Someone seriously did that??? Where was that

 

[AlexGas]

View attachment 27303

You only need one hole when installing a kitchen extractor

I bet it'll the winner in the GSR mag.

 

[ShaunCorbs]

Surely that's a wind up???? Someone seriously did that??? Where was that

No not a wind up mate sent it me said the kitchen fitters broke the boiler

 

[Riley]

Kitchen fitters?? Surely not. Normally such a conscientious bunch

 

[Alex Knight]

Wonder how greasy the burner is haha

 

[Billy Bob Bob]

View attachment 27303

You only need one hole when installing a kitchen extractor

sure to god thats not real????

 

[ShaunCorbs]

sure to god thats not real????

yep and its not the first one i have seen

 

[AlexGas]

yep and its not the first one i have seen

Did you have a chance to get your GFA on this one!?

 

[ShaunCorbs]

Did you have a chance to get your GFA on this one!?

no was sent it by a mate

 

[AlexGas]

That's nuts!!!!!!!!!!!!!!!!!!!!!
Thanks God, a stink pipe haven't been hooked up to it!!!

 

[voivod]

View attachment 27303

You only need one hole when installing a kitchen extractor

no fn way...tell me thats a joke