2 2021bela Messages 44 Dec 6, 2021 #1 I have an Ikea sink with trap however the waste fkexi hose does not connect to the 1 1/2 white waste pipe. Is there any fitting I can get to connect the two together or should I use normal traps and bends from the holes in the sink.
I have an Ikea sink with trap however the waste fkexi hose does not connect to the 1 1/2 white waste pipe. Is there any fitting I can get to connect the two together or should I use normal traps and bends from the holes in the sink.
S steadyon Esteemed Messages 1,026 Dec 6, 2021 #2 Have a look at at McAlpine T28-ISO. Measure the grey flexible waste plain end, and if 38 mm diameter that should do the job.
Have a look at at McAlpine T28-ISO. Measure the grey flexible waste plain end, and if 38 mm diameter that should do the job.
2 2021bela Messages 44 Dec 8, 2021 #3 Is it possible to remove all this Ikea waste under the sink and use all mcalipne fittings, traps etc..
Is it possible to remove all this Ikea waste under the sink and use all mcalipne fittings, traps etc..
2 2021bela Messages 44 Dec 8, 2021 #4 Is it possible to remove all this Ikea waste under the sink and use all mcalipne fittings, traps etc..
Is it possible to remove all this Ikea waste under the sink and use all mcalipne fittings, traps etc..