Search the forum,

Discuss Immersion Heater Element size in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
1
Hi, I need to replace a clapped out immersion heater element in my hot water tank but I'm unsure as to the correct replacement size.
The current element has a length of 16 inchs overall with the actual heater element being 13inches.
any ideas as to the replacement size I should get?
Thanks in advance of any help.
 
If it fitted to the side, it will be a 12 inch. If it's on the top it will be 27 inch.
If it's a pressurised cylinder, get a G3 registered plumber to get a new one, as they ar diferent, depending on manufacturer.
 
Status
Not open for further replies.

Reply to Immersion Heater Element size in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock