Search the forum,

Discuss leak detector/stop tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Jennie

Gas Engineer
Messages
283
Hi all,

I have a customer/landlady, who would like a leak detector/stop tap fitted in her rental property. She's after a valve that will sense a water leak, and shut off the water supply in an emergency.

Is there anything you'd recommend?

Thanks for your advice,

Jennie
 
Jennie, have a look at BES , I am pretty sure they have what you want .
 
I saw something in PHPI, Professional Heating and Plumbing Installer magazine.
Can't remember the make and I think I might have recycled the mag.
Should be in there?
 
HomeServe have invented a leak detector but it doesn't stop it immediately just informs. Google and it will show up.
 
Status
Not open for further replies.

Reply to leak detector/stop tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
291
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
230
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
224
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
311
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
180
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock