Search the forum,

Discuss Leaking shower pod/wall hung shower unit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Jones82

Gas Engineer
Messages
221
Came across this unusual shower unit.

Sirrus shower, leaking from the hoses on the back, which are perishing.

They are pushed onto spigots then secured using jubilees.

Anyone know where I can get some new hoses?

Thanks



 
RJ Pryces lowestoft keep it you can buy online with them and stainless jubilee clips . very poor design but hey ho cheers kop

Screenshot_2018-05-23-04-58-24.png
 
You can buy that hose any size from any pneumatic supplier such as Thorite cheap as chips
 
I buy it by the metre on ebay. Useful hose for poweflushing, you can see air and muck in the flow, buy different diameters.
 
Status
Not open for further replies.

Reply to Leaking shower pod/wall hung shower unit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
102
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
246
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
117
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
198
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock