Search the forum,

Discuss Monument/Rothenberger torch compatibility in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
34
Hi guys, I have a monument 3450 torch with a turbine tip but want a pencil tip for tight corners and smaller pipes etc. Are the rothenberger ones compatible? Or do monument do one? Also, do I need to change the jet if I swap the tip?
 
Monument sell a pencil tip but not for the 3450, wasn't the Benzo TS7000 a rebadged Rothenberger?
 
So if I've got this right, the Rothenberger Super-Fire 2 is actually a rebranded Bernzomatic TS8000. + The only difference between a TS7000 and a TS8000 is the burner tip and possibly the jet?
8000:
7000:

Is this correct?
 
almost all rottenberger tools are rebranded from other manufacturers.

bernzomatic make loads of different torches in the usa, all really good. the rottenberger torch my mate brought with the hose had its rottenberger sticker fall off and had a benzomatic badge underneath LOL
 
almost all rottenberger tools are rebranded from other manufacturers.

bernzomatic make loads of different torches in the usa, all really good. the rottenberger torch my mate brought with the hose had its rottenberger sticker fall off and had a benzomatic badge underneath LOL
Yep got that one myself love it
 
Status
Not open for further replies.

Reply to Monument/Rothenberger torch compatibility in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
112
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
210
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
159
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
204
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
5
Views
130
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock