Search the forum,

Discuss polyorc pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
92
where can I get good safe connections to join onto 3/4" polyorc then go onto copper?
dont have the time available to use glued joints as water cant be off for long
 
Hi is polyorc similar to hunter Genova ? We have a large housing estate full of this material.
I've been using a John guest coupler it's a 15mm to 1\2 inch and 22mm to 3\4
Gets me to copper quickly good luck
 
Status
Not open for further replies.

Reply to polyorc pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock