Search the forum,

Re: Welcome To Ukplumbersforums.co.uk

Discuss Re: Welcome To Ukplumbersforums.co.uk in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

arennie3

Washing Machine Problem.....

has anyone ever came across a faulty washine machine hose, when the plastic nut on one end is connected to a threaded Y connector, can be pulled off by hand easily? if so, do you know the cause?:mad: starting to lose faith inquality of products nowadays. ta arennie3
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Re: Welcome To Ukplumbersforums.co.uk in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
176
ShaunCorbs
ShaunCorbs
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
291
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock