Hi,
Today I noticed one of the tiles in my shower enclosure has a crack in per the pictures below... I'm not sure how long it's been there but we haven't been using the shower for months as I keep meaning to get the seals replaced on the vertical uprights. It was whilst looking at these I noticed the cracked tile. I don't want to go down the road of replacing the tile as owing to it's location the whole shower enclosure frame etc will have to be removed to do it properly.
As for cause, the only thing I can think of that happened recently was a tiny piece of skirting the other side of the enclosure frame was replaced and maybe whilst being installed the tile got cracked.
In any case, we are now looking at how best to repair this... My thoughts have been the following.
1) Apply silicon over the crack.
2) Have heard some kind of epoxy resin might do the trick.
3) Clear nail polish.
Now aesthetically it is not a big deal as it is right in the bottom corner. It's more about preventing water ingress.
I'd welcome any other thoughts / suggestions. Maybe another way is to cover the tile completely with something to stop water getting in.
Today I noticed one of the tiles in my shower enclosure has a crack in per the pictures below... I'm not sure how long it's been there but we haven't been using the shower for months as I keep meaning to get the seals replaced on the vertical uprights. It was whilst looking at these I noticed the cracked tile. I don't want to go down the road of replacing the tile as owing to it's location the whole shower enclosure frame etc will have to be removed to do it properly.
As for cause, the only thing I can think of that happened recently was a tiny piece of skirting the other side of the enclosure frame was replaced and maybe whilst being installed the tile got cracked.
In any case, we are now looking at how best to repair this... My thoughts have been the following.
1) Apply silicon over the crack.
2) Have heard some kind of epoxy resin might do the trick.
3) Clear nail polish.
Now aesthetically it is not a big deal as it is right in the bottom corner. It's more about preventing water ingress.
I'd welcome any other thoughts / suggestions. Maybe another way is to cover the tile completely with something to stop water getting in.
Attachments
Last edited:
