Search the forum,

Discuss Scrap copper prices on the up in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,157
Time to sort all your scrap out guys the price has topped £4000 for a metric ton for clean heavy stuff . cheers kop
 
Could do with weighing in can't move in the garage and could do with some Sangrea money , holls on Sunday , get in !!!!
 
Good for you town first time i have got above 4k hope you get a few quid , have a great time and a good rest up bud cheers kop
 
Cheers pal , just been manic lately, and off for a fortnight , ooohhhh , my first fortnights holiday in my life lol , mind you I have had more than enough "weeks "
 
Feck did it a month ago was at 2.5 a ton
 
The scrap yard, with a bin full of clean copper, half a bin of unclean and two half bin fulls of brass out the garage:p:D:p
 
Feck did it a month ago was at 2.5 a ton
Was a pleasent suprise bud i can get the van ignition barrel changed and a couple of new tyres at no cost to me result , not so good for you but i always say what ever you get its more than you left the house with in the morning have a good weekend shaun. Cheers kop
 
Was a pleasent suprise bud i can get the van ignition barrel changed and a couple of new tyres at no cost to me result , not so good for you but i always say what ever you get its more than you left the house with in the morning have a good weekend shaun. Cheers kop

Yep too true better than a kick up the arse and you mate
 
Status
Not open for further replies.

Reply to Scrap copper prices on the up in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
198
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
166
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
58
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock