Posting a message to the forum will remove the above advertisement
  1. Checkout our Plumbers Insurance area - heavily discounted Public Liability Insurance and Van Insurance specifically designed for plumbers.

Discuss Standard size for the cut out on a kitchen sink in the Plumbing Forum area at UKPlumbersForums.co.uk.

  1. Iain

    Iain New Member

    I was wondering if anybody could possibly confirm if 35mm is the standard size for the cut out hole for a kitchen sink tap? Any help would be appreciated.
     
  2. richard978

    richard978 Member

    Surely the sink has tap hole /s
     
  3. jtsplumbing

    jtsplumbing Plumber GSR Top Contributor!!

    Have you bought one of those small inset sinks ? photo would help, is it S/Steel or other material
     
  4. oz-plumber

    oz-plumber Plumber

    32mm - 38mm.
    Depending on tap and whether or not it has a pull our vegie sprayer.

    35mm should be ok for standard mixer.
    Vegie sprayer ( pull out ) requires 38mm
     
  5. Darren Jackson

    Darren Jackson Plumber GSR

    Not all sinks come pre-drilled, and some taps fix onto the work surface so coring/drilling is necessary. But the size does vary depending on the tap. 35mm is average size. But I would not core a hole before having the tap on site just to be safe.
     
  6. Iain

    Iain New Member

    That's great, thanks for all the input.
     
Loading...
Similar Threads - Standard size kitchen Forum Date
Old 70s taps not standard fixing Valves & Taps Jan 28, 2018
Boiler size and costs Commercial Plumbing Forum Thursday at 7:17 AM