Search the forum,

Discuss The winner of the Makita Drill competition with Victorian Plumbing is... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Lou

-
Staff member
Esteemed
Admin
Subscribed
Messages
1,019
A huge thank you to everyone who entered the @VictorianPlumbing competition to win the 18v Makita Drill.



We are very pleased to announce that the winner is… Dave Howe



Congratulations Dave!



Thanks again to everyone who entered and stayed tuned for more competitions in the very near future.

Trade giveaway logo + drill.jpg
 
Well done Dave and harvest I have a feeling your going to get a few numbers on the Euro lottery :)
 
Well done Dave and harvest I have a feeling your going to get a few numbers on the Euro lottery :)
Well done Dave. I was just joking. ;);)Glad you said that Shaun as I actually put it on last night and I have not played it in about 12 months.
 
Well done Dave. I was just joking. ;);)Glad you said that Shaun as I actually put it on last night and I have not played it in about 12 months.

It's 165 ish ?
 
Status
Not open for further replies.

Reply to The winner of the Makita Drill competition with Victorian Plumbing is... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
212
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
123
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
65
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
216
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock