Got an 8 year old eco Tec 831 and the diverter was letting by so I changed the diverter to still have the same problem. Then realised the motor was not pulling the pin outwards when energised so have replaced the motor too. The problem is the motor makes all the right noises but not pulling the pin out.
Discuss Vaillant eco TEC 831 combi hot water problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 1,826
You're on a public forum giving gas advice chaps
- Messages
- 34,327
- Solutions
- 2
- Messages
- 34,327
- Solutions
- 2
- Status
Reply to Vaillant eco TEC 831 combi hot water problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4 times since.
It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall)
Unfortunately turning this to the closed position only reduces...
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Hi All
I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 1
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 1
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 2
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 3
-
Show us your fanciest radiators you have installed!!- Started by Lou
- Replies: 0
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 6
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
