Search the forum,

Discuss Vokera maxin 24e no hot water flow switch/sensor or diaphragm in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Matt0029

Gas Engineer
Messages
1,103
I have a Vokera maxin 24e that wont fire for hot water is there anyway of telling if it a damaged diaphragm or the hot water flow switch/sensor? Thanks.
 
the boiler fires when I put a screwdriver in and press the hot water flow switch in. The spindle from the diverter valve is moving out when a hot water demand is made but no far enough out for spindle to hit and compress the hot water flow switch. Is the likely course a split diaphragm?
 
Yes very common on baxis
 
With the Vokera maxin is it best to remove the whole
Domestic Distribution Manifold to get access when replacing the diaphragm? Thanks
 
Status
Not open for further replies.

Reply to Vokera maxin 24e no hot water flow switch/sensor or diaphragm in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock