Search the forum,

Discuss Water conditioners - Eddy Electronic, Aquabion, Halcyan in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

john37

In a hard water area, Thames Water....

Has anyone got any actual experience of Eddy Electronic, Aquabion and Halcyan water conditioners?
 
Tried em bud they dont live up to expectations, the only real way to soften your water supply is a salt water softner plenty out there to choose from regards kop
 
Yes, I know the salt water softeners do the job, they actually remove the "hardness", I've used one in the past. But in this property a salt water softener won't be suitable, I'm afraid.
So the question is, has anyone actually tried these water conditioners - Aquabion, Halcyan, Eddie Electronic - and has actual experience of how well they work?
 
The Physics is sketchy , for anything to work some cheap fitting somewhere is probably getting eaten , then a film forms any benefit fades...
Like many posts before the shame of admitting
it fails , and you paid good money is self silencing !
Unless anyone lives in a region where water chemistry is just right !
(please say where /combi-UVC--big,install/ /system-age/No. of users/----FOR a MAP)
 
Yes, I was just wondering if anyone found they worked at all.

The property is in London NW11, very well insulated, Viessmann Vitodens 100W system boiler with UFH and a 300l unvented indirect cylinder with a hot water circulating loop, mains pressure cold water, new install, 7 showers, 11 WCs, 11 basins, kitchen, utility. Typically 9 users a day for the showers, more users for the WCs/basins.
 
Of your list 2 use electronic methods
(the Jury has been dismissed several times)
, and one adds some Zinc.
I'm sceptical of its success (It's new to me)
(it may be trying to mimic ION exchange, the
succesfull -saline one ) Sales men !
Sorry could not be more optimistic/usefull.
 
Status
Not open for further replies.

Reply to Water conditioners - Eddy Electronic, Aquabion, Halcyan in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
209
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
Replies
39
Views
540
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
275
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
253
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
7
Views
188
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock