Search the forum,

Discuss What's a fair price for extending combi Flues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
9
Got some work coming up extending flues for external insulation company.
got a few queries please guys...
what's a fair price?
What paper work would be involved? / Gas inspection record?
Cheers
 
are you extending an in tunle flue to an external wall it depends on how far! and it would need to be done by a gse and ticket for work carried out as for the price dont no with out seeing jod
 
you will need to replace the whole flue as shaun says work out how many you can do in a day and charge accordingly cheers kop
 
And check that a new flue IS available for each boiler before you commit to each one.
There may be some old / very old boilers fitted.
 
you will need to replace the whole flue as shaun says work out how many you can do in a day and charge accordingly cheers kop

Would think 3-4 a day with tests and certification

Depending on length and if complies with regs
 
Status
Not open for further replies.

Reply to What's a fair price for extending combi Flues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
179
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
4
Views
185
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
209
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
250
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
405
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock