Yes thank you that makes total sense. Tomorrow I am going to seap valves and flow meters around on the basis that flow and return are the wrong way around and then see how that goes. If no improvement I will call in the experts.
Yes it is a by pass but I don't know where it goes. The pipe looks headed to the boiler which is behind the wall next to it. No I'm very limited to what I can see. What I was starting with was trying to find a way to confirm which...
1737561793
Well yes, I know that. But this is what I have inherited. I'm just seeing what is needed to make it work better. Not all manifolds have the pump and mixer valve attached, it's not completely unusual especially on an older...
Thanks, yes, here we are. You can see the manifold and then the pump and the thermohead centre is in the airing cupboard which is about 40 feet away from the manifold on the ground floor. I have now replaced the valves, flow meters and...
Hi all, we bought a house 3 years ago that has underfloor heating on the ground floor but the way it has been installed does not seem to conform to any of the accepted standard. It has a newish oil boiler that is running the UFH temp at...