Yes that's it and the basin waste is to the right.
Good should. I can get access via the ground floor and will give that a try. Hopefully it works.
Won't be anywhere near it when filling and draining the bath though! 😀
Thanks!
On my version of your photo, if the bath waste is as identified then the best way if you can access that pipework is to remove the access cap circled yellow, use a snake / flexi and push it down towards the stack first, there's only one...
Any other suggestions? Given plunging/unblockers have not been successful so far.
I've seen those drain snake devices but am reluctant to use that for fear of it getting stuck or breaking around one of the 90 degree bends
Got a bath that which drains extremely slowly, to the point where if taking a shower, the bath fills up. It's been like this from the time I got the place. (About 9 years ago)
It's got a 40mm (I think) waste that runs about 2.5 metres...
So I'm in the process of replacing a failed shower valve and I've noticed on removing the old one that it only has metal Inserts fitted to the plastic pipe on two out of four pipes. Specifically the hot and cold inlet pipes have got...
I need to replace a shower valve that has plastic pipe going into the compression elbows on the back of the unit.
The photo shows one of the said pipes in the background
Having not worked with this type of pipe before can someone let...
I've got a leaking shower mixer valve. That's got a small leak coming from the top tap handle.
Does anyone know firstly if this kind of thing is serviceable and how do the handles come off in order to remove the back plate in order to...