Can you solvent weld a flexipipe directly to a shower waste?

[almo18]

Hi had a guy come fit a new shower for me and he had taken the compression nut off the shower waste and solvent welded the end of a flexi hose connector directly to the waste outlet will this be ok?
[automerge]1586004763[/automerge]

Hi had a guy come fit a new shower for me and he had taken the compression nut off the shower waste and solvent welded the end of a flexi hose connector directly to the waste outlet will this be ok?

He didn't put an adapter on just straight in

 

[ShaunCorbs]

Depends on the plastic on both items but if it’s designed for a compression nut I would say no

 

[JCplumb]

Quick google and you can get solvent flexi wastes, so you can if the pipe it is welded to is also solvent weld.
Magicflex Solvent Weld Flexible Waste Connector 1.1/2" - 19280 | BES.co.uk - https://www.bes.co.uk/magicflex-solvent-weld-flexible-waste-connector-11-2-19280

 

[oz-plumber]

Flexi's on waste pipes are a 'Bodge'

My opinion only.

 

[almo18]

So the red marked elbow on the waste taken off and the red mark part on the hose glued in. Seems bodge but should it be ok ran water through and no leaks?
[automerge]1586087702[/automerge]

So the red marked elbow on the waste taken off and the red mark part on the hose glued in. Seems bodge but should it be ok ran water through and no leaks?

[automerge]1586087703[/automerge]

So the red marked elbow on the waste taken off and the red mark part on the hose glued in. Seems bodge but should it be ok ran water through and no leaks?