Core drilling

[mutley racers]

Hi, do any of you guys use a drill for core drilling as well as other drilling? Or do you just use drills meant for core drilling?

I want to buy a drill but dont want to have to buy 2 big drills. So would like to know if a combi drill with hammer and chisel could core drill waste and flues.

Thanks lads.

P.S. Argentina to win the cup!!!!!

Messi GOAAAAAALLLLLL!!!!!!!1

 

[bathroomboy]

Hi, do any of you guys use a drill for core drilling as well as other drilling? Or do you just use drills meant for core drilling?

I want to buy a drill but dont want to have to buy 2 big drills. So would like to know if a combi drill with hammer and chisel could core drill waste and flues.

Thanks lads.

P.S. Argentina to win the cup!!!!!

Messi GOAAAAAALLLLLL!!!!!!!1

You need a drill with a clutch on it otherwise you could end up with a nasty injury.

 

[alex]

Bosch make what they claim is a combined coring and SDS+ drill, dont know the model number. looks like a bulky and heavy pain in the bum to be honest. probs better with a 3 function SDS+ and a seperate coring drill besides how often do you without warning need to core a large hole? you can leave it at home 9 days out of 10.

update - its called bosch 'multidrill' but at £299 +vat in ITS london there probs isnt even a significant cost saving in it.

 

[Billy Bob Bob]

as someone pointed out you need a clutch on a core drill,ihad a accident with a sds i was using for coring a few years ago,put my back teeth trough my tongue,it hurt like hell,there was lots of blood and i could not talk properly for 3 months,you really should use a purpose made core drill for coring inmho

 

[oldplumber]

just blown up my sparky core drill, tried sds drills from screw fix previously but they are to slow and burn out to quickly so next stop a proper drill for coring ie a marcrist, high speed and clutched. your old titan sds off screw fix just doesnt rotate quick enough. So buy the right tool for the job and hopefully it should last, Ive tried saving money over the last few years and in the end itscheaper to buy the boy for the job. omho

 

[moony]

hire one out as you need it and charge to the job....

i have a milwauke core drill excellent piece of kit and cost 290 off ebay

 

[rodders09]

I use tha makita 8406 and works well. you could pick one up for about £210 to £260.

 

[Blackcatgas]

I use tha makita 8406 and works well. you could pick one up for about £210 to £260.

, me too, paid £200 for it (20mnths ago) never let me down and has never thrown me off the ladders.