K
knittygritty
I am at my wits end with my boiler situation, the only positive thing about it all is that my gas bill will be lower as i have had no heating for 3 weeks or more now and had two plummers in??? is there any help out there that wont cost me a fortune?
My boiler started just going off and the red reset button flashing once a second, got told well it could be ur pump or it could be this and that and finally No its ur board, then i called another plummer and he thought he had fixed the problem saying there was a blockage, all seemed fine, water and heating was on and the pressure was ok. 20 mins after he left the light started flashing again but 4 times a second. He came back and phoned worcester and they said it was the low pressure switch. I ordered one from internet and got the man to come out and fit it. All was fine again for at least 40mins, pressure ok water and heating good. So he left and we were happy as we hadnt had to pay for a pcb. 10 mins later all went off again! he came back and called worcester again and they said it was the board! so we had to wait for that to come. In the meantime the pressure went through the roof when it fired up so had to keep it off.
I have had the board fitted now but still no heating as the pressure goes sky high still but was ok with the water but now even that has stopped working, i have to keep pressing the reset button. I am now told it is probably the pressure relief valve and if not that then its the expansion vessel. Is my problem ever going to be fixed? i cant afford all this and cant get boiler cover till it is working or can i?? someone please help and advise??😕
My boiler started just going off and the red reset button flashing once a second, got told well it could be ur pump or it could be this and that and finally No its ur board, then i called another plummer and he thought he had fixed the problem saying there was a blockage, all seemed fine, water and heating was on and the pressure was ok. 20 mins after he left the light started flashing again but 4 times a second. He came back and phoned worcester and they said it was the low pressure switch. I ordered one from internet and got the man to come out and fit it. All was fine again for at least 40mins, pressure ok water and heating good. So he left and we were happy as we hadnt had to pay for a pcb. 10 mins later all went off again! he came back and called worcester again and they said it was the board! so we had to wait for that to come. In the meantime the pressure went through the roof when it fired up so had to keep it off.
I have had the board fitted now but still no heating as the pressure goes sky high still but was ok with the water but now even that has stopped working, i have to keep pressing the reset button. I am now told it is probably the pressure relief valve and if not that then its the expansion vessel. Is my problem ever going to be fixed? i cant afford all this and cant get boiler cover till it is working or can i?? someone please help and advise??😕