Anyone know where I can find so install manuals for a vertex flue on an old Worcester 240 combi.
I popped into to look at one with no heating (pretty sure it’s a controls issue) but wanted to get some info on the flue before I attempt to fix it.
Never actually seen one in the flesh.
Would you do literally everything? So drain fully drain central heatings system and drain the cylinder too? Or would you just do loft tanks and turn off mains, open taps?
Thanks
Taken a couple of days off to do some jobs at home never seem to get any time , topped up the insulation in the loft , fitted a new towel rail , we treated ourselves to a new TV for crimbo as there's nothing else we needed ours was about 10 years old so had to be home for the delivery.
The Mrs...
What’s everyone using?
General isolations valves for 15mm pipe to taps, toilets etc
The £1 are crap
The £5-6 levers are a bit overkill
There doesn’t seems to be a middle ground valve
Does the forum seem quiet in your opinion? I’m on another forum and there’s several plumbing, heating and gas related posts usually daily, but certainly more frequently than on here. Could it be the adverts, as mentioned here? Maybe it’s the minimum amount of characters required? Or maybe it’s...
I don't post often but wanted to share the absolute joke that Checkatrade has become.
Just a few days ago I've had a casual spam email from them "10 ways to improve your profile blah blah" I opened that and what caught my eye is uploaded below. Without any notice, without any effort to cosult or...
Customers call and text on a Sunday about non important stuff.
doesn’t it bother you or do you have a separate work phone?
1.00pm missed call and answerphone message asking if i can service his neighbours boiler next month.
7.00 pm someone else text asking how much to fit a hive.
Carried out a routine service on a Valliant 637 fitted by me some 12 years ago now , replaced heat ex insulation £47.50 + vat I thought was a bit expensive ? all was ok till I checked the combustion air intake and found similar readings to in the main flue so meant a strip down and a ring round...
Want to change waste and change trap for plastic. If I can get a compression coupler over that little bit of horizontal waste pipe I can do the rest as have box of loads of random waste bits and pieces. But if I cut off the trap and then find nothing goes over that bit of pipe I'm screwed...
Needs to be suitable for gravity fed hot and preferably from Screwfix, Toolstation, Wickes, B&Q.
I know some have the bolt at the front as have randomly noticed, but can't remember which. Hoping someone did one recently and remembers.
It's either than or really awkward cutting out of backing...
Standard CH white rad, flow and return connected at the top, bottom connections blanked, make-shift bleed fitted on pipework at top straight after one of the valves, ignoring looks as being used for temporary heat, not fitted to wall, sat on two wooden blocks, it should get hot/work normally yes?
Saved another Valliant from the scrap yard fitted this some 15 years ago and it missed a few services over the years , developed a fault through the COVID years at a guess , get a few of these each heating season . Kop
I'm was struggling to get my head around the cost of a powerflush. If I add up the various costs...
Let's say you use 1 litre X400 or equivalent = £25
1 dose of DS40 or X800 or equivalent = £20
1 litre inhibitor = £15
10 hours' labour...
My plumbers from another mother how are we all??
Looking at working cleaner so wondered if anyone out there could offer a recommendation.
Looking for something to shove on the end of a vacuum to collect dust from coring.
Something like this Bosch 1600A001G8 GDE 162 Dust Extraction for Core...
Bit of a problem with one of these my carpenter mate has one fitted 10 years + I'd say not looked after at all 🙁 recently developed a overheating issue , two port valve on the unvented cylinder was faulty , Salus wireless stat loosing pairing , expansion vessel shot , got this all sorted...
I have been to an ariston e combi evo the I believe has a leaking main heat exchanger.
I can’t isolate the flow and return as they drip so need to open up the SS heat exchanger.
I have the new gasket but it’s not a full circle like Vaillant seals and is held together with a staple ( I assume for...
Nursed this aging Flexicom back to health yesterday new expansion vessel , prv and flue holed flue gas collector replaced , carried out a full strip down and service reset the gas valve on high and low with the anylser spot on all good.
Question for you why do these boiler come in with a bonk on...
Hi,
I have my boiler on a boiler plan with Baxi. The heating hadn't been turned on since spring (a rookie mistake no doubt.) Engineer visited but he was only there to service. I think he briefly called for heating while doing whatever he was doing and then said it went "crazy" noise wise and...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.