Has anyone had a good look through this Strategy to lower Carbon emissions by 2050?
Introduction from the govt website
The heat and buildings strategy sets out the government’s plan to significantly cut carbon emissions from the UK’s 30 million homes and workplaces in a simple, low-cost and...
Hello all, I'm searching for advice on my new system being fitted into a very old stone house in France.
We have purchased a thermflow 300L thermal store with a built-in expansion tank to work with multiple heating inputs (solar, electric and wood burning stove boiler). We are running 7 rads...
Hi all
Are there any Windhager Biowin2 experts who can help me to understand what this means?
I’m fairly sure mine doesn’t have such a mixing valve and not sure what or why one is required.
I’d like to understand before trying to find someone to install what the original installers omitted 8...
I’ve had a Viessmann ASHP fitted. Fan noise outside is v low- we do not notice it. Inside though, the joules cyclone unvented cylinder seems to be making a constant whine. At first I thought it was the Vitocal 200 boiler beside it but I am pretty sure it is the tank? It is all new ( April) and...
What are the factors that determine the life of a water tank? Obviously the quality of the water and the materials used to construct the tank are important. But beyond that I'm fuzzy. Is it just the number of gallons of water that pass through it? The number of "fresh" gallons of water that...
Hi . I am a DIY trying to reconnect my wetback and solar hot water panels I have had a horizontal outdoor water cylinder made up . Most of the connections are straightforward but I am not sure about the vent at the top . On the old one there was a 2 meter vertical open pipe but I am not sure...
Hi all. I have an Isoflo CL170 cylinder with good few years life left in it in my system which has performed trouble-free other than the odd new immersion element. I'm getting a new ASHP fitted and the installer is recommending scrapping the Isoflo and replacing it with a Secon Trade Heatpump...
Morning,
Does anybody know what happens to a solar thermal flat panels (a pair on south facing slate roof) that have been unused for at least 12 months possibly year before also. System has been switched of due to loss of pressure. How will last years heat wave conditions have effected the panel...
I'm building a new house and I have no idea what option to chose for heating/hot water! I've looked at biomass/pellet boilers, electric combi boilers, air source heat pumps and solar panels(combined with an electric boiler) After doing a lot of research (and not understanding some of the...
If my mates in the Electrician's Forum see me in here, jus' tell I got lost, alright ;)
So, I was called out to the home of a good client. They have a thermal solar installation but were not completely clear of the difference - hence calling in a sparky and I was interested as to how thermal...
Hi guy
I had solar thermal installed and wanted an expert opinion, had it installed today and its not working and the installer is to return. I get the impression when it comes to the electrical side the installer hasn’t the foggiest, he replaced the water valve and now my boiler does not heat...
Hello
My solar thermal system appears to be leaking fluid (pics attached). Could anyone give me an indication of what the issue is likely to be and the potential cost to rectify?
The system was installed in May 2021 and has a flat plate panel on the roof. It works very well generally and...
Hi, Solar thermal not so big these days but a couple of Q for anyone who still works in it.
Background. I'm an Electrician not a plumber.. I've been maintaining my otherwise excellent solar thermal (Original install MCS by Others), for the last ~ 18 years, over which time I've needed to clean...
I had a solar thermal cylinder installed last week.
The installers had an issue with one of the valves and installed a 15mm pipe (see red arrow in picture) instead of the 22mm at the valve. Is this going to be an issue?
The 15mm then feeds into the larger 22mm. However, my concern is that...
I’d like some advice and opinions please.
I have a 150 year old stone cottage ( 2 foot thick solid stone walls) some roof insulation and double glazed windows in a very cold exposed hill top position in the north western Yorkshire Dales.
we are planning to put underfloor heating downstairs and...
Hi everyone,
I am qualified to work on unvented cylinders but have no experience with solar panels. I have a customer which has a leaking unvented cylinder with solar coil attached.
am i legally allowed to replace the cylinder,is their regulations with solar?
if so, is it easy to drain the...
Hello
I had a solar thermal installation. However, the Gledhill Stainless Steel Lite keepings making popping noises. Anyway, I was looking to have it replaced with another cylinder and found this one: Gledhill SunSpeed 2 Open Vented Indirect Twin Coil Solar Cylinder | Vented Cylinder -...
I have had a Nibe ASHP installed, F2040 and VVM320 indoor module. The manual for setting it up goes through how to do each step, but gives no overview.
There are three different ways of setting internal temperature; by setting an internal level (or an internal temperature of a thermostat is...
Moved into a new property around 4 years ago with full 15Kw Vaillant Arotherm ASHP setup, after quite a few initial teething problems seems to run well over last couple of years.
Long term just wondering if anyone can advise on servicing (in Berkshire area). Are there any independent specialist...
Hello, I hope someone can give me some advice on replacing an old air source heat pump.
We moved into a shared ownership house last year which has a Daiken air source heat pump fitted to provide heating and hot water. The unit was fitted when the house was built 12 years ago. It seems that the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.