Hi, first post ![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Purchased a number of fittings today and long story short, after being referred to as Yorkshire fittings over the counter, I suspect this was a bit misleading?.
How do I know if the solder ring fittings purchased are a) safe for drinking water (and b) presumably, if that means also WRAS approved).
The fittings don't have the Yorkshire brand squiggle, only say:
EN1254 [KX] LF 22.
Did check online and seemed the EN wasn't enough to say, guessing KX is the brand but hard to diagnose online and may not be reassured by staff's say so in the shop now.
Thanks,
Barry
Purchased a number of fittings today and long story short, after being referred to as Yorkshire fittings over the counter, I suspect this was a bit misleading?.
How do I know if the solder ring fittings purchased are a) safe for drinking water (and b) presumably, if that means also WRAS approved).
The fittings don't have the Yorkshire brand squiggle, only say:
EN1254 [KX] LF 22.
Did check online and seemed the EN wasn't enough to say, guessing KX is the brand but hard to diagnose online and may not be reassured by staff's say so in the shop now.
Thanks,
Barry