Search the forum,

Standard size for the cut out on a kitchen sink

Post new thread

Discuss Standard size for the cut out on a kitchen sink in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I

Iain

Messages
2
I was wondering if anybody could possibly confirm if 35mm is the standard size for the cut out hole for a kitchen sink tap? Any help would be appreciated.
 
Have you bought one of those small inset sinks ? photo would help, is it S/Steel or other material
 
32mm - 38mm.
Depending on tap and whether or not it has a pull our vegie sprayer.

35mm should be ok for standard mixer.
Vegie sprayer ( pull out ) requires 38mm
 
Status
Not open for further replies.

Reply to Standard size for the cut out on a kitchen sink in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
107
Lou
Lou
D
Replacing outdoor P-Trap Gully with Bottle Gully
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
76
DIwhYdidIstartThis
D
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
33
Chuck
C
C
Is it necessary to earth bond a Kitchen Sink?
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
Replies
6
Views
221
pritchardsplumbing
P
U
Below Ground Soil Pipes on Self Build Bungalow
Just started gound work on self build bungalow and wondering best way to do below ground soil pipes. For toilet I was going to go straight down through slab and out through deadwork into a manhole. I will work out falls from manhole and set the height of the waste water system as required. For...
Replies
2
Views
91
umiq88
U
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock