Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
Discuss Unvented composite valve (reliance) query? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Messages
- 34,367
- Solutions
- 2
expansion vessel port normally after the balanced
I thought that was the case but I’m being assured that the 22mm connection on the side can be used for a balanced cold as well as a balanced cold out the bottom of the valve??
- Messages
- 8,642
Never have two balances, if it got the plastic plug in it thats for the ex vessel , could do with a pic or manufacturer
- Messages
- 34,367
- Solutions
- 2
it could be but no scv in the end so would require one
- Messages
- 48
Balanced cold only any good before the check valve, if you blow back through the valve (opposite direction of flow) the port your getting air through is for the expansion vessel and the other will be for balanced cold
- Messages
- 34,367
- Solutions
- 2
why does it reduce to 15mm
It goes off to a kitchen and bathroom.
This a different valve to what’s in the photo mate.
- Messages
- 48
I’m aware of that I was posting that whilst he posted picture so I didn’t see until after, anyway I was showing as an example they still work the same
- Messages
- 34,367
- Solutions
- 2
meter inlets
I don’t actually know tbh with you. I was concentrating on the vessel set up and the 2 balanced colds if I’m honest. Have any of you seen a combi valve with 2 balanced colds?
Last edited:
Single check valve ??
- Messages
- 5,073
Are we talking about the red item or the blue ?Cos I see only one balanced cold port (blue). The other is a manifold for the cold water (red).
- Messages
- 48
This is what I couldn’t grasp, not sure what he was trying to ask. I think he means the cylinder side of the combination valve but don’t get why you would want to do that anyway when there’s a balanced cold there
- Messages
- 34,367
- Solutions
- 2
Yea else hot water could flow backwards
Pressure reducing valve
Balanced take off with internal check valve
Balanced take off
Single check valve
Pressure relief valve
Would have to go like that so separate prv and relief valve needed
dan_the_plumber
Gas Engineer
- Messages
- 437
Have you got your G3 certificate? Maybe you could do with an update 
- Messages
- 8,642
Unless theres another picture I cant see , that set up is fine .
Reply to Unvented composite valve (reliance) query? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
Newest Plumbing Threads
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-
-
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Replies: 0
-
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Replies: 1
-
Blocked waste pipe - Inspection cover problem.
- Started by Urbanbassman
- Replies: 2
-
See the Stunning Before and After of These 6 Local Kitchen and Bath Makeovers- Started by Dan
- Replies: 0
-
$300,000 USD Renovation for a female boss’ semi-detached house in Yio Chu Kang
- Started by Dan
- Replies: 0