2" bsp Immersion heater

[Aberned]

I've got a Swedish buffer cylinder as part of my ground source heating system. I'm trying to find an immersion heater with a 2" bsp thread for a sensible price. Everything in thus country seems to be 2.25" bsp.

Any advice gratefully received!

Thanks

 

[REDSAW]

.........................

 

[Dotty]

An unvented buffer?

 

[gasmanrob]

Never worked with ground source but have done with air source.

I'd perhaps try and contact the manufacturer for one ASAP as that immersion carries out the weekly bacteria cleanse.

I remember the dimplex sc had a smaller then usual immersion element I'm not sure on the specific size but might be worth looking into it further

Sorry I can't be of more help

 

[ShaunCorbs]

Homepage - Backer Electric

 

[Aberned]

I'm trying to find an immersion heater with a 2" bsp thread. Most here seem to be 2.25" bsp. Any help appreciated! Thanks.

 

[PlumbBobBob]

it wouldn't be for an unvented cylinder would it?

 

[Aberned]

It's for a Swedish tank that was installed as a buffer as part of my groundsource heat pump system. I'd say it is unvented but not an expert :-(. Would that make a difference for an immersion?

 

[gasmanrob]

Someone gave you a link yesterday on the same subject in your other thread

 

[Aberned]

Thanks for your help. I've tried them and they provide one but it's industrial grade so quite expensive. Might have to bite the bullet

 

[Dotty]

And being as it's unvented you must not be working at it.

You need a G3/unvented plumber.

Thread closed now and I will be merging this with your other one.

And it'll be closed too..