Accessing Flexicom 24hx installer cartridge

[tony435]

Some what but the issue is you will need to do dual temp eg 60 for heating the cylinder up to kill legionella and then your desired flow temp for the rads eg 40

Right, yes that's exactly what I was planning on doing. Dropping the temp when only the UFH is active and raising it when the HW is on.

 

[ShaunCorbs]

Right, yes that's exactly what I was planning on doing. Dropping the temp when only the UFH is active and raising it when the HW is on.

If the boiler allows that the older gloworms were problematic to say the least don’t turn it off for long periods it might not come back on

 

[tony435]

If the boiler allows that the older gloworms were problematic to say the least don’t turn it off for long periods it might not come back on

Hah ok thanks! It all seems to be working well now, but I'll keep an eye on it