Search the forum,

Discuss Advice on a few coureses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
14
Hi guys, just wondered if you heard of any of these. I'm looking to do the City & Guilds Diploma in Plumbing Level 2

The colleges I contacted are as follows and I will outline the time to complete and so on:


Able Skills in Dartford - 2 weekend off, 2 weekends on for 30 weeks - £2999
Alpha Building Services and Engineering in Stratford - 2 evenings per week plus every Saturday for 16 weeks - £2930
Career Studies College of Building Services in Edgware - Every Saturday for 27 weeks - around £3000(I think)

Do any of you know these colleges and are they any good? I have to do the course part time because of my full time job. I've been warned about intensive 6 week courses so I've tried to stay clear of them.

Can anyone give me some advise please?
 
I did an Intro to Plumbing course at Able Skills, they seem legit. I'm looking into Alpha, I've heard good things but would like to hear more. Anyone on hear been to Alpha?
 
Is the course a theory based qualification? The only one that matters is the 6189 that is the NVQ. Anything else and I would think very carefully as no one will employ you with a theoretical qualification. When I did my NVQ there were guys in the college who already had there level 2 theory yet they had to do it all again as part of the 6189 NVQ, waste of time !! Just have a proper think about it. What do you want out of the theory course? If it's a bit of DIY knowledge for around the house, go for it, expensive... but
 
Status
Not open for further replies.

Reply to Advice on a few coureses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
237
P
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
7
Views
302
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
1
Views
42
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
501
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock