Aqualisa From Pumped To Unpumped Processor

[DjClubber]

Can you just convert the Processor from the Fully Pumped over to the Un Pumped Processor if the installation is just at the moment Pumped but being converted to a Combi? Ideally want to keep the Ceiling Fed Kit Below and just be able to change the Processor? Will it Wire in the same and be able to use the Start / Stop below? Please can you let me know ASAP??? TY...

The pic shows the manual with both, the pumped is installed at mo but ideally want to change to unpumped for Combi. . .

 

[ShaunCorbs]

I think so have to change the whole unit like you say eg from pumped to mains / high pressure but you can keep everything else I think

 

[Aire]

Yes you can just switch the processors around, all outlets, control panels and diverters are compatible with both the pumped and standard processors.

 

[DjClubber]

Thanks, appreciated. Will order unpumped version. . . Thanks for the quick replies. Once again Appreciated. . .

 

[ShaunCorbs]

Thanks, appreciated. Will order unpumped version. . . Thanks for the quick replies. Once again Appreciated. . .

The one in the pic ?

 

[Welder]

Do yourself a favour tho. Get rid of those PF isolators and put some full bore ones in. #BetterFlows

 

[Aire]

Do yourself a favour tho. Get rid of those PF isolators and put some full bore ones in. #BetterFlows

Never thought of doing this, I suppose there's no issues with It affecting warranty?

 

[DjClubber]

The one in the pic ?

No, not getting 1 in pic, that was just off FLEABAY just to answer my original question. Ill source a new unit. Normally would of spoke to Aqual for Tech but was closed when needed them LOL. . . Q answered here though. . .

 

[Welder]

Never thought of doing this, I suppose there's no issues with It affecting warranty?

None.

 

[Mrb]

If your shower is the pumped version just turn the processor over to Combi.