Balancing U/Floor heating manifolds

[MOSSEP]

Hi,

Have got a job coming up in a local school, large system with 8no underfloor heating manifolds.

School reports that they do not heat up very well and want me to take a look. Without installation plans showing volume of water in the underfloor loops is there an easy way or tool / meter available for balancing and setting up the flow regulators?

Thanks

Martin

 

[Ermintrude]

Run it for a day on full pelt and use clamp on thermo to measure temp on returns from loops. Check it's not actuators or a feed problem first .

Will take few attempts to balance cold / patchy system.

 

[MOSSEP]

I thought as much! No magic meter then?